Template:PCIe to NVME Sets: Difference between revisions

(30 intermediate revisions by 4 users not shown)

Line 1:

~~Geekworm PCIe to NVME Sets:~~

After the [https://www.raspberrypi.com/products/ai-kit/ Raspberry Pi AI Kit] launched, we put four PiPs ([[X1001]], [[X1004]], [[X1011]], [[M901]]) through testing; only X1011 does not support the Hailo-8 AI accelerator.

Line 6:

Line 4:

'''Our tentative conclusions are as follows:'''

* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[~~X1015~~]]/[[~~X1002~~]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.

* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[X1001]]/[[X1015]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.

* If you don't care about the high performance brought by PCIe 3.0, then you can consider using [[X1004]], so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.

*Caution: The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.~~~~

▼ Expand 📋 {{Red|'''Geekworm PCIe to NVME Family:'''}}

</div>

* {{Red|The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.}}

* {{Red|1=In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage x Current).}}

{| class="wikitable"

! Model !! Compatible with !! Position!! NVMe M2 SSD Length Support!! Matching Case !! Matching Cooler !! Support NVMe Boot !! Support PCIe 3.0 !! Support Hailo-8 AI Accelerator !! Product Matching Reference

! Model !! Compatible with !! Position!! NVMe M2 SSD Length Support !! Power Input !! Power Supply for SSD !! Matching Case !! Matching Cooler !! Support NVMe Boot !! Support PCIe 3.0 !! Support Hailo-8 AI Accelerator !! Product Matching Reference

|-

|[[X1001-Max]] || Raspberry Pi 5 || Top|| 2230/2242/2260/2280||

*27W-120W USB-C PD power supply (Recommended 65W/100W PD power supply)

*9-20Vdc via DC jack (Recommended 12V 5A power adapter [[PSU60]])

:{{Red|Warning: Only one power source should be connected at a time}}

|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - ||{{Red|Yes}}||

*'''Power Adapter:''' [[PSU60]]

|-

| [[X1000]] || Raspberry Pi 5 || Top|| 2230/2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||

| [[X1000]] || Raspberry Pi 5 || Top|| 2230/2242||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1001]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||

| [[X1001]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]

*5 VDC ±5% via FFC

*5 VDC ±5% via XH2.54 interface

:'''NOTE:'''

:*FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

:*XH2.54 interface – for use only when SSD power is insufficient ([https://wiki.geekworm.com/File:X1001-Interface-front-back.jpg see explanation])

|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1002]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| 2230/2242/2260/2280|| [[P580]] / [[P580| P580-V2]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||NO||

| [[X1002]] || Raspberry Pi 5 ||{{Red|Bottom}}|| 2230/2242/2260/2280||

*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]]

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A || [[P580]] / [[P580| P580-V2]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||NO||

*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1003]] || Raspberry Pi 5 ||Top || 2230/2242|| [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] ~~~~Only~~~~||Yes||-||Not tested||

| [[X1003]] || Raspberry Pi 5 ||Top || 2230/2242||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] {{Red|Only}}||Yes||-||Not tested||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1004]] || Raspberry Pi 5 ||Top|| ~~~~Dual ssd</~~span>~~: ~~2280~~|| [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||~~~~Yes~~~~||

| [[X1004]] || Raspberry Pi 5 ||Top||{{Red|Dual ssd}}: 2280||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1005]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| ~~~~Dual ssd~~~~: 2230/2242/2260/2280|| [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||~~~~Yes~~~~||

| [[X1005]] || Raspberry Pi 5 ||{{Red|Bottom}}||{{Red|Dual ssd}}: 2230/2242/2260/2280||

*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]]

*5 VDC ±5% via FFC & GPIO pin header

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1011]] || Raspberry Pi 5 ||~~~~Bottom~~~~|| ~~~~4 ssds~~~~: 2230/2242/2260/2280|| [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||

| [[X1011]] || Raspberry Pi 5 ||{{Red|Bottom}}|| {{Red|4 ssds}}: 2230/2242/2260/2280||

*'''Raspberry Pi 5 UPS:''' [[X1209]]

* Pi 5 USB‑C: 5V, ≥5A {{Red|(for 1–2 SSDs).}}

* X1011 DC jack: [[PSU50]] 5V, 10A {{Red|(for 1–4 SSDs).}}

|| 3.3 V, max 10A || [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||

*'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]

*'''Power Adapter:''' [[XS-GaN-27W]] / [[XSL-GaN-27W]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1012]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||[[P579]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||

| [[X1012]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]

*35–57 VDC via Power over Ethernet (PoE)

*40–57 VDC via auxiliary power jack

|| 5V, 5A || [[P579]]|| [[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[X1015]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||

| [[X1015]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||

*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]

*'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)

|-

| [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||~~~~Yes~~~~||-

| [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||

*5 VDC ±5% via FFC

:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])

|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||-

|-

| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

|-

| [[Q200]] || Raspberry Pi 5 ||Top|| ~~~~Dual ssd: 2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||NO||-||Not tested||-

| [[Q200]] || Raspberry Pi 5 ||Top|| {{Red|Dual ssd: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||NO||-||Not tested||-

|-

| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

|-

| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||-

|}

</div>

@@ Line 1: / Line 1: @@
-<span class="tb_red">Geekworm PCIe to NVME Sets:</span>
 After the [https://www.raspberrypi.com/products/ai-kit/ Raspberry Pi AI Kit] launched, we put four PiPs ([[X1001]], [[X1004]], [[X1011]], [[M901]]) through testing; only X1011 does not support the Hailo-8 AI accelerator.
@@ Line 6: / Line 4: @@
 '''Our tentative conclusions are as follows:'''
-* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[X1015]]/[[X1002]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
+* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[X1001]]/[[X1015]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
 * If you don't care about the high performance brought by PCIe 3.0, then you can consider using [[X1004]], so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
-<span class="tb_red">*Caution: The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.</span>
+<div style="font-weight:bold; padding:5px 0; border-bottom:1px solid #ddd;">
+  <span class="mw-customtoggle-myTable" style="cursor:pointer; color:#0645ad;">▼ Expand</span> 📋 {{Red|'''Geekworm PCIe to NVME Family:'''}}
+</div>
+<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-myTable">
+{{Red|Caution:}}
+* {{Red|The Matching Case section only indicates compatibility between the case, PCIe Peripheral Board and Raspberry Pi 5 Board, and excludes products in the Product Matching Reference section. Compatibility of these referenced products with the case is subject to their actual specifications.}}
+* {{Red|1=In addition to voltage and current, ensure that the total power of the power supply meets or exceeds the recommended input power (Total Power = Voltage x Current).}}
 {| class="wikitable"
-! Model !! Compatible with !!  Position!!  NVMe M2 SSD Length Support!!  Matching Case !! Matching Cooler !! Support NVMe Boot !! Support PCIe 3.0 !! Support Hailo-8 AI Accelerator !! Product Matching Reference
+! Model !! Compatible with !!  Position!!  NVMe M2 SSD Length Support !! Power Input !! Power Supply for SSD !! Matching Case !! Matching Cooler !! Support NVMe Boot !! Support PCIe 3.0 !! Support Hailo-8 AI Accelerator !! Product Matching Reference
+|-
+|[[X1001-Max]] || Raspberry Pi 5 || Top|| 2230/2242/2260/2280||
+*27W-120W USB-C PD power supply (Recommended 65W/100W PD power supply)
+*9-20Vdc via DC jack (Recommended 12V 5A power adapter [[PSU60]])
+:{{Red|Warning: Only one power source should be connected at a time}}
+|| 3.3V ±5% Max 8A || - || [[X-FAN40]] / [[H505 | Official Cooler]] / [[H501]] / [[H510]] || Yes || - ||{{Red|Yes}}||
+*'''Power Adapter:''' [[PSU60]]
 |-
-| [[X1000]] || Raspberry Pi 5 || Top|| 2230/2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||
+| [[X1000]] || Raspberry Pi 5 || Top|| 2230/2242||
-*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]
+*5 VDC ±5% via FFC & GPIO pin header
+:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||
+*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1001]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
+| <mark>[[X1001]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
-*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]
+*5 VDC ±5% via FFC
+*5 VDC ±5% via XH2.54 interface
+:'''NOTE:'''
+:*FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+:*XH2.54 interface – for use only when SSD power is insufficient ([https://wiki.geekworm.com/File:X1001-Interface-front-back.jpg see explanation])
+|| 3.3V, max 3.5A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||
+*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1002]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| 2230/2242/2260/2280|| [[P580]] /<br> [[P580| P580-V2]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||NO||
+| <mark>[[X1002]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}|| 2230/2242/2260/2280||
-*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]]
+*5 VDC ±5% via FFC & GPIO pin header
+:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+|| 3.3V, max 3.5A || [[P580]] /<br> [[P580| P580-V2]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||NO||
+*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1003]]</mark> || Raspberry Pi 5 ||Top || 2230/2242|| [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] <span class="tb_red">Only</span>||Yes||-||Not tested||
+| <mark>[[X1003]]</mark> || Raspberry Pi 5 ||Top || 2230/2242||
-*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]
+*5 VDC ±5% via FFC & GPIO pin header
+:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+|| 3.3V, max 3.5A || [[P579]] / [[P425]] ||[[H500|Official Cooler]] / [[H501]] / [[H510]] {{Red|Only}}||Yes||-||Not tested||
+*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1004]]</mark> || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280|| [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
+| <mark>[[X1004]]</mark> || Raspberry Pi 5 ||Top||{{Red|Dual ssd}}: 2280||
-*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]
+*5 VDC ±5% via FFC & GPIO pin header
+:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+|| 3.3V, max 3.5A + 3.5A || [[P579|P579-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||
+*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1005]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">Dual ssd</span>: 2230/2242/2260/2280|| [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||<span class="tb_red">Yes</span>||
+| <mark>[[X1005]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}||{{Red|Dual ssd}}: 2230/2242/2260/2280||
-*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]]
+*5 VDC ±5% via FFC & GPIO pin header
+:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+|| 3.3 V, max 6A || [[P580| P580-V2]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes (Requires EEPROM 2024/05/17 and later version)||NO||{{Red|Yes}}||
+*'''Raspberry Pi 5 UPS:''' [[X1207]] / [[X1209]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242/2260/2280|| [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||
+| <mark>[[X1011]]</mark> || Raspberry Pi 5 ||{{Red|Bottom}}|| {{Red|4 ssds}}: 2230/2242/2260/2280||
-*'''Raspberry Pi 5 UPS:''' [[X1209]]
+* Pi 5 USB‑C: 5V, ≥5A {{Red|(for 1–2 SSDs).}}
+* X1011 DC jack: [[PSU50]] 5V, 10A {{Red|(for 1–4 SSDs).}}
+|| 3.3 V, max 10A || [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes (eeprom 2024/05/17 and later version)||NO||NO||
+*'''Raspberry Pi 5 UPS:''' [[X1209]] / [[X-UPS1]]
 *'''Power Adapter:''' [[XS-GaN-27W]] / [[XSL-GaN-27W]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1012]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||[[P579]] ||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||
+| <mark>[[X1012]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
-*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]
+*35–57 VDC via Power over Ethernet (PoE)
+*40–57 VDC via auxiliary power jack
+|| 5V, 5A || [[P579]]|| [[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||Not tested||
+*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| <mark>[[X1015]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||
+| <mark>[[X1015]]</mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
-*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]]
+:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+|| 3.3 V, max 6A || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||
+*'''Raspberry Pi 5 UPS:''' [[X1200]] / [[X1201]] / [[X1202]] / [[X1203]] / [[X1205]] / [[X1206]] / [[X-UPS1]]
 *'''Accessories:''' [[DIY Spacer and Screw Kit]], [[G341]] (90° Right-Angle Bidirectional GPIO Extender), [[K182]] (GPIO Extender Kit)
 |-
-| [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||<span class="tb_red">Yes</span>||-
+| [[M901]] || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280||
+*5 VDC ±5% via FFC
+:'''NOTE:''' FFC cable: 5V/1A rated input, max 5W. Actual input current varies with SSD ([https://wiki.geekworm.com/File:Nvme-SSD-Current-Note.jpg SSD-Current-Note])
+|| - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] / [[H509]] / [[H510]]||Yes||-||{{Red|Yes}}||-
 |-
-| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
+| [[Q100]] || Raspberry Pi 5 ||Top|| 2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 |-
-| [[Q200]] || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
+| [[Q200]] || Raspberry Pi 5 ||Top|| {{Red|Dual ssd</span>: 2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||<span class="tb_red">NO</span>||-||Not tested||-
 |-
-| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
+| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 |-
-| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
+| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280|| - || - || [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H501]] / [[H505]] /  [[H509]] / [[H510]]||Yes||-||Not tested||-
 |}
+ </div>
+</div>