Open main menu
Geekworm Wiki

Changes

X1207

198 bytes added, 9 February
{{GD Template Impl}}
[[File:X1207-IMG-9926-Interface-1.jpg|thumb|right|X1207 V1.2 Interface Schematic]]
[[File:X1207-IMG-0073.jpg|thumb|right|X1207 V1.2]]
[[File:X1207-IMG-0101-pogo-pin-connection.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
[[File:X1207-IMG-0105-Power.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
[[File:X1207-IMG-0077.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
[[File:X1207-IMG-0099.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
 
==Safety Instructions & Warnings==
'''⚠''' <span class="tb_red">The default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before installing your battery in the {{UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage. '''⚠''' <span class="tb_red">It is essential to read and understand these safety instructions and warnings before charging your batteries. '''⚠''' <span class="tb_red">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury, and damage to property if charged or used improperly. '''⚠''' <span class="tb_red">Never make a wrong polarity connection when charging or discharging battery packs. Always double-check the polarity of the battery's connector to ensure that "+" is connected to "+" and "-" is connected to "-". '''⚠''' <span class="tb_red">Do not mix and use old batteries with new batteries, or batteries with different brand names. '''⚠''' <span class="tb_red">Lithium batteries have a limited cycle life. Please replace old batteries with new ones when they reach their service life or when they are two years old, whichever comes first. '''⚠''' <span class="tb_red">When charging the Battery Pack, please place the battery in a fireproof container. Do not leave the UPS shield on wood material or carpet unattended. '''⚠''' <span class="tb_red">Keep the UPS shield away from children to ensure their safety.Safety Warning}}
==Overview==
With intelligent power management, it monitors Pi status, cuts power after shutdown to conserve battery, and features ultra-low standby consumption. The board ensures seamless power switching during outages and supports auto power-on and AC loss detection.
 
{{Raspberry Pi 5 UPS Sets}}
==Features==
* [[X1002]] single NVMe shield for Pi5
* [[X1005]] dual NVMe shield for Pi5
* [[X1006]] PCIe to SATA 2.5 HDD+M.2 SSD shield for Pi 5
* [[X1007]] PCIe to dual SATA 2.5 HDD/SSD shield for Pi 5
* [[X1100]] USB3 to SATA 2.5 HDD/SSD shield for Pi 5
* Other add-on boards are attached to the bottom of the Raspberry Pi
|-
| '''Notes''' ||
*5Vdc 5A via USB-C
|-
| '''UPS output''' || *5.1V ±5% Max 5A
|-
| '''Battery charging current''' || *1.5A
|-
| '''Terminal Battery Voltage''' || *4.23V
|-
| '''Battery Recharge Threshold''' || *4.1V
|-
| '''Ports & Connectors''' ||
*40-pin extended GPIO header x1
|-
| '''PCB Size''' || *86.5mm x 84.5mm
|}
==User Manual==
* '''Hardware Installation: [https://suptronics.com/Raspberrypi/Power_mgmt/x1207-v1.2_hardware.html X1207 Hardware]''', <span class="tb_red"> You can view the '''Raspberry Pi GPIO used''' and '''Dimensions''' here </span>
* '''How to make it work: [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1207 Software]'''
==Packing List==
*Pogo pin x 1 (For connecting to the Pi 5 PSW through hole)
[[File:X1207-IMG-0015-Packing-List.jpg|600px]] ==User ManualInstallation Guide==*Installation of X1207 and [[X1207-C1]]:[[File:X1207-X1207-C1-Install-guide.jpg|800px]] Installation Video for Raspberry Pi 5+[[X1207]]+[[X1207-C1]]: https://youtu.be/Xorg8pj33yM{{#ev:youtube|https://youtu.be/Xorg8pj33yM}} ==Matching Case==The [[X1207-C1]] is a premium metal case specially designed for the Raspberry Pi 5 X1207/'''[[X1208]]''' UPS Shield, offering robust protection in a sleek, black aesthetic.* Case dimension: 92.8 x 90.8 x 42.8 mm <gallery> X1207-C1-IMG-0165-Packing List.jpg|X1207-C1 AccessoriesX1207-C1-IMG-0167.jpg|X1207-C1X1207-C1-IMG-0170.jpg|X1207-C1X1207-C1-IMG-0174.jpg|X1207-C1 </gallery>
==FAQ==
<!-- 这里提供了一个Q&A的模板，增加Q&A时按照下面的格式写就可以了 -->
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q1: Question 1
</div>
<div class="mw-collapsible-content">
A: Place the answer here.
</div>
</div>
 
<!--Add review function! -->
<comments />
 
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
 
[[Category:Product Manual]]
[[Category:Raspberry pi]]
Retrieved from "https://wiki.geekworm.com/Special:MobileDiff/23777...24772"