Changes

The X12-A1 V1.0 is a 4-cell parallel 18650 stackable battery holder rack designed to accommodate expand the backup power of UPS HAT systems. It uses a parallel configuration of four 18650 batteries, providing plug-and-play battery capacity expansion for compatible UPS HAT systems such as the [[X1209]] (top-mounted) and [[X1203]] (bottom-mounted). Each battery is protected by a resettable has an independent ultra-low resistance resettable fuse to effectively prevent over-discharge. It features risks; the four parallel XH2.54 connectors for easy integration with UPS HAT models such as the X1209 support convenient connection and X1203, and supports a stackable designmulti-stand stacking, allowing for flexible increases in total power capacity expansion through multiple basesas needed.

* '''Compatible Models:''' [[X1209 ]] UPS HAT (top-mounted Raspberry Pi), [[X1203 ]] UPS HAT (bottom-mounted Raspberry Pi).

*'''Core Application: '''The X12-A1 provides a backup battery expansion solution for the aforementioned UPS HATs.

| '''Operating voltagePorts & Connectors''' || XH2.54 2Pin parallel interface x 4 5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier boardcell 18650 battery socket x1

| '''Start voltage''' || ≥ 3.5V|-| '''Power consumption''' || 0.35W|-| '''Rated currentPCB Size''' || 093.07A ± 09mm x 77.02A|-| '''Fan speed control''' || Pulse width modulation control with tachometer|-| '''Maximum fan speed''' ||5000 RPM ± 10%|-| '''Rated current''' || 0.07A ± 0.02A|-| '''Fan speed control''' || 6.01 CFM|-| '''Noise''' ||24.3 dBA|-| '''PCB dimensions''' || 1mm65×57mm

 * X12-A1 18650 battery holder (4-cell parallel) x1 * 1 x X2-FAN40 V1pin 2.0 PWM Controlled Fan HAT54mm pitch male-to-male cable AWG18 30cm x2 * 2-pin 2.54mm pitch male-to-male cable AWG 10cm x1 * M2.5x22+6mm x4 * M2.5x5mm x4 * 4 x Spacer M/F M2.5x12mm5mm nut x4 * X12-A3 Acrylic Plate x1 * 4 x Spacer F/F M2.5x20mm5x6+3mm x8 * 8 x Screw M2.5x5mmx4 [[File:X12-A1-IMG-0396-Packing-List+X12-A3.jpg|600px]]

* XX12-FAN40 A1 Hardware Guide:[https://suptronics.com/Raspberrypi/StoragePower_mgmt/xx12-fan40a1-v1.0_hardware.html XX12-FAN40 A1 Hardware]* X[[File:X12-A1-X1203-Install-FAN40 Software Guide:.jpg|800px]][[httpsFile://suptronics.com/Raspberrypi/Storage/xX12-A1-X1209-fan40Install-v1Guide.0_software.html X-FAN40 Softwarejpg|800px]]