Template:X120x-FAQ: Difference between revisions
No edit summary |
No edit summary |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 201: | Line 201: | ||
<div class="toccolours mw-collapsible mw-collapsed"> | <div class="toccolours mw-collapsible mw-collapsed"> | ||
<div style="font-weight:bold;line-height:1.0;"> | <div style="font-weight:bold;line-height:1.0;"> | ||
Q9: What battery is recommended for this | Q9: What battery is recommended for this UPS shield? | ||
</div> | </div> | ||
<div class="mw-collapsible-content"> | <div class="mw-collapsible-content"> | ||
| Line 210: | Line 210: | ||
If using a lithium battery, the required voltage is 3.7V; | If using a lithium battery, the required voltage is 3.7V; | ||
If using a battery pack or battery holder, please make sure it is a parallel battery pack. '''Please use a high-quality battery holder with thick and durable connection cables. Using a low-quality battery holder with thin or poorly connected wires may cause the X1203 to malfunction or fail to operate as expected.''' | |||
There are 2 XH2.54-2P battery connectors on board, it is recommended to use the same type of battery. | There are 2 XH2.54-2P battery connectors on board, it is recommended to use the same type of battery. | ||
| Line 282: | Line 283: | ||
'''Please note: If the UPS does not detect the RPi5, it will automatically shut down within 3 seconds. So you need to install the RPi 5 on the UPS and make sure that the RPi5 has good contact with the UPS's pogo pins.''' | '''Please note: If the UPS does not detect the RPi5, it will automatically shut down within 3 seconds. So you need to install the RPi 5 on the UPS and make sure that the RPi5 has good contact with the UPS's pogo pins.''' | ||
</div> | |||
</div> | |||
<div class="toccolours mw-collapsible mw-collapsed"> | |||
<div style="font-weight:bold;line-height:1.0;"> | |||
Q15. Which product should I choose if I can’t connect to a Raspberry Pi via pogo pins? | |||
</div> | |||
<div class="mw-collapsible-content"> | |||
A: | |||
For the X12-UPS series, we recommend the '''[[X1206]]''' – models from X1200 to X1205 do not support this usage. The X120- UPS series auto-powers off when no Raspberry Pi 5 is detected, while the X1206 can be set to "Always Power On" mode and keeps working even if the Raspberry Pi is shut down. Please refer to <span style="color:red">'''Interface ⑩_ALON'''</span> in the picture. | |||
[[File:X1206-IMG-7240-Interface-New.jpg|800px]] | |||
You can also consider the '''[[X-UPS1]]'''. It features a GPIO Pin-Connected standalone design with high flexibility for installation and adaptation (refer to the picture). | |||
[[File:X-UPS1-IMG-5409.jpg|800px]] | |||
</div> | </div> | ||
</div> | </div> | ||