[[File:X1207-IMG-0101-pogo-pin-connection.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
[[File:X1207-IMG-0105.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
[[File:X1207-IMG-0077.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
[[File:X1207-IMG-0099.jpg|thumb|right|X1207 V1.2 with Raspberry Pi 5]]
==Safety Instructions & Warnings==
'''⚠''' <span class="tb_red">The default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before installing your battery in the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.
With intelligent power management, it monitors Pi status, cuts power after shutdown to conserve battery, and features ultra-low standby consumption. The board ensures seamless power switching during outages and supports auto power-on and AC loss detection.
{{Raspberry Pi 5 UPS Sets}}
==Features==
|}
==User Manual==
* '''Hardware Installation: [https://suptronics.com/Raspberrypi/Power_mgmt/x1207-v1.2_hardware.html X1207 Hardware]''', <span class="tb_red">'''You can view the ['''Raspberry Pi GPIO used] ''' and ['''Dimensions source file (DXF)] here''' here </span>
* '''How to make it work: [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1207 Software]'''
*Screw M2.5x5mm x 8
*Pogo pin x 1 (For connecting to the Pi 5 PSW through hole)