Changes

The '''X15-POE1 ''' is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the '''[[X1500 ]]''' or '''[[X1501 ]] '''IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.

Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while also providing a separate an independent 12V output to support . This output can drive peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.

* ''' Standard Compliance''': IEEE 802.3af & 802.3at (PoE+)

* '''Input Voltage Range''': 37–57V 36–57V DC

* '''Device Classification''': Class 4

* '''Dual Output Power Rails''':

# 5V DC / 5A (25W max) delivered via the 40-pin GPIO header.

# 12V DC / 2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector. * <span class="tb_red">Note:Total maximum combined output is 25W 25w (subject to input power limits).</span>

* Fully Isolated Power Supply Topology: Fully Utilises isolated switched-mode power supply Switching Mode Power Supply (SMPS) topologyfor safety and reliability

* Simplified Cabling: Single-Cable Solution: Delivers both cable simultaneously addresses power delivery and data to the CM5 through a single Ethernet cable. * Peripheral Power: Provides a network connectivity, providing robust, dedicated 12V output power for peripherals, eliminating the need for an additional external power supply.

| Power supply output || 35-57VDC powering over Ethernet5.1V 2.5A/12V 1.1A @IEEE 802.3af 5.1V 5.0A/12V 2.1A @IEEE 802.3at 

| Power output Ports & Connectors || 5.1V 2.5A / '''PoE input interface''': 2x2-pin header x1 '''GPIO expansion interface''': 2x20-pin header x1 '''12V 1.1A @ IEEE 802.3afoutput interface''':  5.1V 5.0A / 12V 2-pin XH2.1A @ IEEE 802.3at54 connector x1

| Ports & Connectors Dimension || 2x2pin POE female header x1 2x2Opin GPIO extended female header x1 2-pin XH265×43.54 12V output connector x1|-| Dimensions || Example2×22.1mm (L×W×H)

* screw pack x1(for securing to IO Hat)[[File:X15-POE1-IMG-0015-Packing-List.jpg|600px]]

* Hardware Installation: * How to make it work[https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html X15-POE1 Hardware]