Changes

The '''X15-POE1 ''' is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the '''[[X1500 ]]''' or '''[[X1501 ]] '''IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.

Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while also providing a separate an independent 12V output to support . This output can drive peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.

* ''' Standard Compliance''': IEEE 802.3af & 802.3at (PoE+)

* '''Input Voltage Range''': 37–57V 36–57V DC

* '''Device Classification''': Class 4

* '''Dual Output Power Rails''':

# 5V DC / 5A (25W max) delivered via the 40-pin GPIO header. 12V DC /2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector. <span class="tb_red">Note:Total maximum combined output is 25w (subject to input power limits).</span> * Fully Isolated Power Supply: Utilises isolated Switching Mode Power Supply (SMPS) topology for safety and reliability * Simplified Cabling: Single cable simultaneously addresses power delivery and network connectivity, providing robust power for peripherals == Technical Specification== {| class="wikitable" |-| Power supply || 36-57VDC powering over Ethernet|-| Power output || 5.1V 2.5A/12V 1.1A @IEEE 802.3af 5.1V 5.0A/12V 2.1A @IEEE 802.3at

# 12V DC / 2.1A (25W max) delivered via a dedicated 2|-| Ports & Connectors || '''PoE input interface''': 2x2-pin XH2.54 connectorheader x1

* Power Supply Topology: Fully isolated switched2x20-mode power supply (SMPS) topologypin header x1

* Single-Cable Solution'''12V output interface''': Delivers both power and data to the CM5 through a single Ethernet cable.

* Peripheral Power: Provides a robust, dedicated 12V output for peripherals, eliminating the need for an additional external power supply2-pin XH2.54 connector x1|-| Dimension || 65×43.2×22.1mm (L×W×H)|}

* Hardware Installation: * How to make it work[https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html X15-POE1 Hardware]