681
edits
Changes
Jump to navigation
Jump to search
no edit summary
{{GD Template Impl}}
[[File:X15-POE1-IMG-0016.jpg|thumb|X15-POE1]]
[[File:X15-POE1-IMG-0018.jpg|thumb|X15-POE1]]
[[File:X15-POE1-IMG-0015-Interface_&_size.jpg|thumb|X15-POE1]]
[[File:X15-POE1-IMG-0022.jpg|thumb|X15-POE1]]
[[File:X15-POE1-IMG-0027.jpg|thumb|X15-POE1]]
==Overview==
The '''X15-POE1 ''' is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the '''[[X1500 ]]''' or '''[[X1501 ]] '''IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.
Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while also providing a separate an independent 12V output to support . This output can drive peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.
==Features==
* ''' Standard Compliance ''': IEEE 802.3af & 802.3at (PoE+)
* '''Input Voltage Range ''': 36–57V DC
* '''Device Classification ''': Class 4
* '''Dual Output Power Rails ''':
5V DC / 5A (25W max) delivered via the 40-pin GPIO header.
12V DC /2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector.
<span class="tb_red">Note:Total maximum combined output is 25w (subject to input power limits).</span>
* Fully Isolated Power Supply: Utilises isolated Switching Mode Power Supply (SMPS) topology for safety and reliability
* Simplified Cabling: Single cable simultaneously addresses power delivery and network connectivity, providing robust power for peripherals
== Technical Specification==
{| class="wikitable"
|-
| Power supply || 36-57VDC powering over Ethernet
|-
| Power output ||
5.1V 2.5A/12V 1.1A @IEEE 802.3af
5.1V 5.0A/12V 2.1A @IEEE 802.3at
|-
| Ports & Connectors || '''PoE input interface''':
2x2-pin header x1
'''GPIO expansion interface''':
2x20-pin header x1
'''12V output interface''':
2-pin XH2.54 connector x1
|-
| Dimension || 65×43.2×22.1mm (L×W×H)
|}
==Packing List==
* X15-POE1 board x1
* screw pack x1(for securing to IO Hat)
[[File:X15-POE1-IMG-0015-Packing-List.jpg|600px]]
==User Manual==
* Hardware Installation: * How to make it work[https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html X15-POE1 Hardware]
==FAQ==