Difference between revisions of "X15-POE1"
Jump to navigation
Jump to search
| (42 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{GD Template Impl}} | {{GD Template Impl}} | ||
==Overview== | ==Overview== | ||
| − | The X15-POE1 is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the X1500 or X1501 IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable. | + | |
| + | The '''X15-POE1''' is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the '''X1500''' or '''X1501 '''IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable. | ||
| − | Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while | + | Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while providing an independent 12V output. This output can drive peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter. |
==Features== | ==Features== | ||
| − | * Standard Compliance: IEEE 802.3af & 802.3at (PoE+) | + | * ''' Standard Compliance ''': IEEE 802.3af & 802.3at (PoE+) |
| − | * Input Voltage Range: | + | * '''Input Voltage Range ''': 36–57V DC |
| − | * Device Classification: Class 4 | + | * '''Device Classification ''': Class 4 |
| − | * Dual Output Power Rails: | + | * '''Dual Output Power Rails ''': |
| − | + | 5V DC / 5A (25W max) delivered via the 40-pin GPIO header. | |
| − | + | 12V DC /2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector. | |
| + | |||
| + | <span class="tb_red">Note:Total maximum combined output is 25w (subject to input power limits).</span> | ||
| − | + | * Fully Isolated Power Supply: Utilises isolated Switching Mode Power Supply (SMPS) topology for safety and reliability | |
| − | * | + | * Simplified Cabling: Single cable simultaneously addresses power delivery and network connectivity, providing robust power for peripherals |
| − | |||
| − | |||
| − | |||
| − | |||
== Technical Specification== | == Technical Specification== | ||
| Line 32: | Line 31: | ||
|- | |- | ||
| − | | Power supply || | + | | Power supply || 36-57VDC powering over Ethernet |
|- | |- | ||
| − | | Power output || 5.1V 2.5A / 12V 1.1A @ IEEE 802.3af | + | | Power output || |
| − | 5.1V 5.0A / 12V 2.1A @ IEEE 802.3at | + | 5.1V 2.5A/12V 1.1A @IEEE 802.3af |
| + | |||
| + | 5.1V 5.0A/12V 2.1A @IEEE 802.3at | ||
| + | |||
|- | |- | ||
| − | | Ports & Connectors || | + | | Ports & Connectors || '''PoE input interface''': |
| − | + | 2x2-pin header x1 | |
| − | 2-pin XH2.54 | + | '''GPIO expansion interface''': |
| + | |||
| + | 2x20-pin header x1 | ||
| + | |||
| + | '''12V output interface''': | ||
| + | |||
| + | 2-pin XH2.54 connector x1 | ||
|- | |- | ||
| Dimension || 65×43.2×22.1mm (L×W×H) | | Dimension || 65×43.2×22.1mm (L×W×H) | ||
| Line 46: | Line 54: | ||
==Packing List== | ==Packing List== | ||
| − | + | ||
| − | |||
* X15-POE1 board x1 | * X15-POE1 board x1 | ||
| − | * screw pack x1 | + | * screw pack x1(for securing to IO Hat) |
==User Manual== | ==User Manual== | ||
Latest revision as of 12:23, 19 September 2025
Overview
The X15-POE1 is a dedicated Power over Ethernet (PoE) add-on board (HAT) designed for the Raspberry Pi Compute Module 5 (CM5) when used with the X1500 or X1501 IO Boards. Compliant with the IEEE 802.3af/at PoE standards, this HAT can receive up to 25W of power from a compatible PoE network switch. It delivers both reliable operating power and network connectivity to the CM5 through a single Cat5e/Cat6 cable.
Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while providing an independent 12V output. This output can drive peripherals such as fans, displays, or motors. This eliminates the need for an additional external power supply, simplifying system integration and reducing clutter.
Features
- Standard Compliance : IEEE 802.3af & 802.3at (PoE+)
- Input Voltage Range : 36–57V DC
- Device Classification : Class 4
- Dual Output Power Rails :
5V DC / 5A (25W max) delivered via the 40-pin GPIO header.
12V DC /2.1A (25W max) delivered via a dedicated 2-pin XH2.54 connector.
Note:Total maximum combined output is 25w (subject to input power limits).
- Fully Isolated Power Supply: Utilises isolated Switching Mode Power Supply (SMPS) topology for safety and reliability
- Simplified Cabling: Single cable simultaneously addresses power delivery and network connectivity, providing robust power for peripherals
Technical Specification
| Power supply | 36-57VDC powering over Ethernet |
| Power output |
5.1V 2.5A/12V 1.1A @IEEE 802.3af 5.1V 5.0A/12V 2.1A @IEEE 802.3at |
| Ports & Connectors | PoE input interface:
2x2-pin header x1 GPIO expansion interface: 2x20-pin header x1 12V output interface: 2-pin XH2.54 connector x1 |
| Dimension | 65×43.2×22.1mm (L×W×H) |
Packing List
- X15-POE1 board x1
- screw pack x1(for securing to IO Hat)
User Manual
- Hardware Installation: https://suptronics.com/Raspberrypi/cm5/x15-poe1-v1.1_hardware.html
- How to make it work:
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher