Changes

The ''' X15-POE1 ''' is a Power over Ethernet (PoE) Head-At-Board (HAT) specifically designed for the '''Raspberry Pi Compute Module 5 (CM5)''', requiring use with either the '''X1500 ''' or ''' X1501 ''' IO base boards. Compliant with the IEEE 802.3af/at (PoE+) standard, this board can draw up to 25.5W of power from a compatible PoE switch via a single Cat5e/Cat6 Ethernet cable, simultaneously providing stable operational power and network connectivity for the CM5.

Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while providing an independent 12V output. This output can drive peripherals such as fans, displays, or motors. This design eliminates reliance on the need for an additional external power suppliessupply, simplifies simplifying system integration, and reduces cable reducing clutter.

* ''' Standard Compliance''': IEEE 802.3af & 802.3at (PoE+)

* '''Input Voltage Range''': 37–57V DC

* '''Device Classification''': Class 4

* '''Dual Output Power Rails''':

<span class="tb_blue">5V Output</span>: Maximum current 5A (provided via 40-pin GPIO connector)

<span class="tb_blue">12V Output</span>: Maximum current 2.1A (provided via dedicated 2-pin XH2.54 connector)

<span class="tb_red">Note:Total Output Power: Maximum 25W (5V and 12V outputs cannot simultaneously achieve maximum current)</span>

| Power output || 5.1V 2.5A / 12V 1.1A @ IEEE 802.3af5.1V 5.0A / 12V 2.1A @ IEEE 802.3at|-| Ports & Connectors || '''PoE input interface''': 2x2-pin header x1 '''GPIO expansion interface''': 2x20-pin header x1

GPIO expansion '''12V output interface''': 2x20-pin header x1

12V output interface: 2-pin XH2.54 connector x1

* screw pack x1(for securing to IO Hat)