Changes

The ''' X15-POE1 ''' is a Power over Ethernet (PoE) Head-At-Board (HAT) specifically designed for the '''Raspberry Pi Compute Module 5 (CM5)''', requiring use with either the '''X1500 ''' or ''' X1501 ''' IO base boards. Compliant with the IEEE 802.3af/at (PoE+) standard, this board can draw up to 25.5W of power from a compatible PoE switch via a single Cat5e/Cat6 Ethernet cable, simultaneously providing stable operational power and network connectivity for the CM5.

Featuring an advanced dual-output design, the board supplies 5V power to the CM5 while providing an independent 12V output. This output can drive peripherals such as fans, displays, or motors. This design eliminates reliance on the need for an additional external power suppliessupply, simplifies simplifying system integration, and reduces cable reducing clutter.

* ''' Standard Compliance''': IEEE 802.3af & 802.3at (PoE+)

* '''Input Voltage Range''': 37–57V DC

* '''Device Classification''': Class 4

* '''Dual Output Power Rails''':

# <span class="tb_blue">5V DC Output</ span>: Maximum current 5A (25W max) delivered provided via the 40-pin GPIO headerconnector)

# <span class="tb_blue">12V DC Output</ span>: Maximum current 2.1A (25W max) delivered provided via a dedicated 2-pin XH2.54 connector) <span class="tb_red">Note:Total maximum combined output is 25W (subject to input power limits). * Output Power Supply Topology: Fully isolated switched-mode power supply Maximum 25W (SMPS5V and 12V outputs cannot simultaneously achieve maximum current) topology</span>

* Single-Cable SolutionFully Isolated Power Supply: Delivers both power Utilises isolated Switching Mode Power Supply (SMPS) topology for safety and data to the CM5 through a single Ethernet cable.reliability

* Peripheral PowerSimplified Cabling: Provides a Single cable simultaneously addresses power delivery and network connectivity, providing robust, dedicated 12V output power for peripherals, eliminating the need for an additional external power supply.

| Power output || 5.1V 2.'''Maximum output current ''':- 5V / 5A - 12V / 12V 12.1A @  '''Actual available power depends on the PoE source ''': - IEEE 802.3afmode: approximately 12W 5.1V 5.0A / 12V 2.1A @ - IEEE 802.3atmode: approximately 25W 

| Ports & Connectors || 2x2pin POE female header x1'''PoE input interface''': 2x2Opin GPIO extended female 2x2-pin header x1

'''GPIO expansion interface''': 2x20-pin header x1 '''12V output interface''': 2-pin XH2.54 12V output connector x1

* screw pack x1(for securing to IO Hat)