3,294
edits
Changes
* '''Dual HDMI 2.0 Ports''': Enables dual 4K display output for multimedia or industrial use cases.
* '''Dual USB 3.2 Gen 1 Ports''': delivering high-speed data transfer rates of up to 5 Gbps.
* '''Dual MIPI DSI/CSI-2 Connectors''': 22-pin FPC connectors (0.5mm pitch) compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display integration.CAM/DISP 0 supports both displays or cameras. CAM/DISP 0 supports using a signal to power down the camera to save power. CAM/DISP 1 typically needs two jumpers fitting to '''J6''' to route the I2C signals from the GPIO connector to the camera connector. CAM/DISP 1 can be used with displays and cameras. If it is used with a camera, it isn’t possible to power down the camera. Also refer to [https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf Raspberry Pi Compute Module 5 IO Board datasheet (Page 5)]
* '''MicroSD Card Slot''': Supports Compute Module 5 Lite variants (without onboard eMMC).
* '''Raspberry Pi HAT+ Compatibility''': Reuse existing Raspberry Pi HATs to save time and reduce development costs.
<span class="tb_red">*</span> <span class="tb_red">For optimal performance, please use the official Raspberry Pi 27W USB-C or Geekworm Power Supply. An incompatible power supply may fail to power on the system.</span>
|}
==User Manual==
* The hardware design refers to the official design, please refer to: https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf
* Hardware Installation: [https://suptronics.com/Raspberrypi/cm5/x1507-v1.0_hardware.html X1507 Hardware], '''please click the left link to view it, and it's very important!'''
* How to make it work: [https://suptronics.com/Raspberrypi/cm5/x1507-v1.0_software.html X1507 Software], '''please click the left link to view it, and it's very important!'''
* You can also refer to the [https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf official CM5 IO board] of the Raspberry Pi Foundation. The usage of X1502 is the same as it.
* https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage
* how to flash os into cm5 emmc, Refer to the following:
#https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage
#https://www.youtube.com/watch?v=SWv-WYlHJWQ
* Configuration steps for using an external antenna:
https://www.raspberrypi.com/documentation/computers/compute-module.html#antenna
==Test & Reviews==
* Screw pack x1
[[File:X1507-IMG-9929.jpg|600px]]
==FAQ==
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
</div>
<div class="mw-collapsible-content">
A: Place When using an external antenna, you need to configure the answer heredevice accordingly.Please follow the official Raspberry Pi documentation for the configuration steps:https://www.raspberrypi.com/documentation/computers/compute-module.html#antenna[[File:Antenna-configuration.jpg|none|Antenna Configuration]]
</div>
</div>