3,294
edits
Changes
The X1507 can be installed inside a sealed metal case, redefining passive cooling by turning the metal chassis into an efficient heatsink. Its innovative thermal design directly transfers heat from CM5 critical components to the enclosure itself, creating a completely fanless system that operates in silence while eliminating dust buildup. This rugged approach ensures maximum reliability in demanding environments where moving parts would fail.
{{CM5 IO Board}}
==Features==
{| class="wikitable"
|-
| '''For use with''' ||
Raspberry Pi Compute Module 5 (CM5)
|-
| '''Key Features''' ||
* '''Optimized for Fanless Operation''': Ultra-compact layout with passive cooling, eliminating noise, dust, and moving parts.
* '''Streamlined System Integration''': All user-facing connectors are positioned on the top side, while chip components and the CM5 are mounted underneath for easy enclosure design.
* '''Dual HDMI 2.0 Ports''': Enables dual 4K display output for multimedia or industrial use cases.
* '''Dual USB 3.2 Gen 1 Ports''': delivering high-speed data transfer rates of up to 5 Gbps.
* '''Dual MIPI DSI/CSI-2 Connectors''': 22-pin FPC connectors (0.5mm pitch) compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display integration.CAM/DISP 0 supports both displays or cameras. CAM/DISP 0 supports using a signal to power down the camera to save power. CAM/DISP 1 typically needs two jumpers fitting to '''J6''' to route the I2C signals from the GPIO connector to the camera connector. CAM/DISP 1 can be used with displays and cameras. If it is used with a camera, it isn’t possible to power down the camera. Also refer to [https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf Raspberry Pi Compute Module 5 IO Board datasheet (Page 5)]
* '''MicroSD Card Slot''': Supports Compute Module 5 Lite variants (without onboard eMMC).
* '''Raspberry Pi HAT+ Compatibility''': Reuse existing Raspberry Pi HATs to save time and reduce development costs.
* '''Supports the Hailo AI ''' acceleration module
* '''Convenient Power Button''': Easily wake or shut down the Compute Module 5 with a single press.
* '''RTC Battery Socket (CR1220)''': Ensures accurate timekeeping during power interruptions.
* '''Configurable Jumpers''': Allows disabling features like wireless connectivity or EEPROM writing for customization.
* '''Streamlined Connector Layout''': USB, HDMI, Ethernet, and power ports are grouped along one edge for clean cable management and easy enclosure integration.
* '''Compatible Accessories''': [[X1012 ]] POE HAT, [[X1207 ]] POE+UPS, [[X1209 ]] UPS* '''POE support''': You can use [[X1012]] to support POE input. There will be more POE expansion boards to support X1507 later |-| '''Technical Specification''' || <span class="tb_red">'''Power supply''': </span>* <span class="tb_red"> 5.1Vdc +/-5% 5A power via USB-C power supply</span> '''Connectivity''':* USB-C (Power in and OS image loading)* 1Gigabit RJ45 Ethernet with PoE+ HAT+ support '''(requires separate Raspberry Pi PoE+ HAT+)'''* 2 x USB3.0 Type-A* 2 x USB2.0 Type-A* Standard 40-pin GPIO header* microSD card socket for Compute Module 5 Lite modules* 2 x M.2 M key NVMe sockets* 4-pin fan connector* 2-pin RTC battery connector* 2 x MIPI DSI/CSI-2 FPC connectors (22-pin 0.5 mm pitch cable)* Raspberry Pi HAT+ connector* RTC battery socket '''Video''': 2 x full-size HDMI 2.0 connectors '''Input power''': External +5V USB-C PSU Power button to wake and shut down Compute Module 5
'''Form factor''': 85mm x 85mm '''Heatsink size''': 85mm x 85mm x12mm (LxWxH) |-|'''Important Notes'''||<span class="tb_red">*</span> <span class=Packing List=="tb_red">For optimal performance, please use the official Raspberry Pi 27W USB-C or Geekworm Power Supply. An incompatible power supply may fail to power on the system.</span>|}
==User Manual==
* The hardware design refers to the official design, please refer to: https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf* Hardware Installation: [https://suptronics.com/Raspberrypi/cm5/x1507-v1.0_hardware.html X1507 Hardware], '''please click the left link to view it, and it's very important!'''* How to make it work:[https://suptronics.com/Raspberrypi/cm5/x1507-v1.0_software.html X1507 Software], '''please click the left link to view it, and it's very important!'''* You can also refer to the [https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf official CM5 IO board] of the Raspberry Pi Foundation. The usage of X1502 is the same as it.* https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage* how to flash os into cm5 emmc, Refer to the following:#https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage#https://www.youtube.com/watch?v=SWv-WYlHJWQ* Configuration steps for using an external antenna:https://www.raspberrypi.com/documentation/computers/compute-module.html#antenna ==Test & Reviews==Test Conditions -System board details: Raspberry Pi Compute Module 5 Lite 2GB RAM -Interface board details: X1507 CM5 IO boards -Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: May 13 2025) openmediavault 7.0 -Storage details: SKhynix HFM128GD3HX015N 128G, KIOXA KBG40ZMT128G 128G - Nework details: Xiaomi WiFi7 router BE6500 - Ambient temperature: 28°C Thermal performance with the supplied passive cooler: After 10 minutes in standby, the CPU temperature reaches 37.5°C. [[File:Cpu-temp_standby.png|600px]] Under a 10-minute stress test, the CPU stabilizes at 57.3°C. [[File:Cpu-temp_stress.png|600px]] Under a 30-minute stress test, the CPU stabilizes at 57.3°C. [[File:Cpu-temp_stress_30.png|600px]] Testing 1Gbps Ethernet on the Raspberry Pi CM5 Use iPerf Tool to Test Network Speed/Bandwidth, Getting max 961Mbps [[File:X1501v1.0-1GbE.png|600px]] Performance test for write speeds on an OpenMediaVault (OMV) shared folder [[File:1GbE-SSD1-w.png|600px]] Performance test for read speeds on an OpenMediaVault (OMV) shared folder [[File:1GbE-SSD1-r.png|600px]] Testing disk drive read speed with hdparm [[File:X1507_hdparm.png|600px]] ==Packing List==* '''X1507 V1.0 CM5 carrier board x1 '''* '''Heatsink 85x85x12mm x1''' * 2.54mm jumer cap x2 * Screw pack x1[[File:X1507-IMG-9929.jpg|600px]]
==FAQ==
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
</div>
<div class="mw-collapsible-content">
A: Place When using an external antenna, you need to configure the answer heredevice accordingly.Please follow the official Raspberry Pi documentation for the configuration steps:https://www.raspberrypi.com/documentation/computers/compute-module.html#antenna[[File:Antenna-configuration.jpg|none|Antenna Configuration]]
</div>
</div>