3,409
edits
Changes
Jump to navigation
Jump to search
'''CM5 carrier board Kit'''
* '''Dual USB 3.2 Gen 1 Ports''': delivering high-speed data transfer rates of up to 5 Gbps. <span class="tb_red">USB 3.0 = USB 3.2 Gen 1 (identical specs)</span>
* '''Dual MIPI DSI/CSI-2 Connectors''': 22-pin FPC connectors (0.5mm pitch) compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display integration.
CAM/DISP 0 supports both displays or cameras. CAM/DISP 0 supports using a signal to power down the camera to save power. CAM/DISP 1 typically needs two jumpers fitting to '''J6''' to route the I2C signals form from the GPIO connector to the camera connector. CAM/DISP 1 can be be used with displays and cameras. If it is used with a camera, it isn’t possible to power down the camera. Also refer to [https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf Raspberry Pi Compute Module 5 IO Board datasheet (Page 5)]
* '''MicroSD Card Slot''': Supports Compute Module 5 Lite variants (without onboard eMMC)
* '''Raspberry Pi HAT+ Compatibility''': Reuse existing Raspberry Pi HATs to save time and reduce development costs.
* '''RTC Battery Socket (CR1220 coin battery is not included)''': Ensures accurate timekeeping during power interruptions.
* '''PWM Fan Support''': Includes a fan power connector for adjustable cooling in demanding environments.
* '''USB-C Port''': Handles both power delivery and OS image loading directly into the CM5’s eMMC. (<span class="tb_red">The OTG port is generally used for flashing the eMMC. If it's used for other purposes, power should be supplied via the 40-pin header—just like the official CM5 IO board.</span>)
* '''Configurable Jumpers''': Allows disabling features like wireless connectivity or EEPROM writing for customization.
* '''Streamlined Connector Layout''': USB, HDMI, Ethernet, and power ports are grouped along one edge for clean cable management and easy enclosure integration.
<span class="tb_red">For optimal performance, please use the official Raspberry Pi '''27W USB-C''' Power Supply or an alternative power supply capable of delivering '''5.1V at 5A'''. An incompatible power supply with a lower output voltage may fail to power on the system.</span>
|}
==Matching Case==
According to user feedback, we have designed a metal case [[X1500-C1]] / [[X15-C1]] specifically for [[X1500]] / [[X1501]] IO boards. [[X15-C1]] and [[X1500-C1]] have different sizes, different appearances, and the same usage.
Here is a detailed comparison:
{| class="wikitable"
! Model !! Compatible with !!compatibility!!Cooler / Heatsink
|-
| [[X15-C1]] V1.0 ||Raspberry Pi CM5||[[X1500]]/[[X1501]]/other low-profile expansion HATs||[[X15-F1]]
|-
| [[X1500-C1]] ||Raspberry Pi CM5||[[X1500]]/[[X1501]]||[[C519]]
|}
'''Please note''': The metal case will shield the wifi signal, so please use Ethernet when you use this case
<gallery>
X15-C1-IMG-9680.jpg|X15-C1
X1500-C1-IMG-9275-NEW.jpg|X1500-C1
</gallery>
==Packing List==
* X1500 V1.0 CM5 carrier board x 1
* M.2-A1 extension board x 2 (to fix M.2 2230 and 2242 SSDs)
* 2.54mm jumer cap x 2
* M2*3 screw x 6
[[File: X1500-Packing-List.jpg|900px800px]]
==User Manual==
* Hardware Installation: [https://suptronics.com/Raspberrypi/cm5/x1500-v1.0_hardware.html X1500 Hardware], '''please click the left link to view it, and it's very important!'''
* How to make it work: [https://suptronics.com/Raspberrypi/cm5/x1500-v1.0_software.html X1500 Software], '''please click the left link to view it, and it's very important!'''
* You can also refer to the [https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf official CM5 IO board] of the Raspberry Pi Foundation. The usage of X1500 is the same as it.
* https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage
* how to flash os into cm5 emmc, Refer to the following:
#https://smarthomecircle.com/how-to-install-os-on-raspberry-pi-compute-module-5-emmc-storage
#https://www.youtube.com/watch?v=SWv-WYlHJWQ
Since both the C519 heatsink and PCB holes are threaded, proper alignment and minimal spacing are crucial during assembly. Carefully align the C519 with the PCB mounting holes, press down firmly until the heatsink touches the PCB, then tighten the screws.
[[File:C519-IMG-9184-1-WiKi.jpg|700px900px]]
[[File: X1500-IMG-9252-Installtion.jpg|900px]]