Changes

<span class="tb_red">'''PS:'''</span> * If you use [[X630]], please remove <code>,4lane=1</code> and <code>dtoverlay=tc358743-audio</code> * '''dtoverlay=tc358743,4lane=1,cam0''' or '''dtoverlay=tc358743,4lane=1,cam1''' is required when use it with CM5 and CM5 IO board such as [[X1500]] /[[X1501]], When using '''CAM/DISP0''' socket of [[X1500]] /[[X1501]], please use the <code>'''cam0'''</code> parameters. When using '''CAM/DISP1''', please use the <code>'''cam1'''</code> parameters.

<mark>'''PS:''' Make sure to connect the HDMI source device to get the HDMI signal, if you can't get the correct resolution here1920x1080P as shown above, consider adjusting please check the resolution of your '''hdmi source device ''' to match the EDID.</mark>

Here are a few tutorials:* Tutorial from customers: [https://github.com/geekworm-com/RPi5_hdmi_in_card RPi5_hdmi_in_card]'''(recommend)'''* Possible software problems: [https://github.com/raspberrypi/firmware/issues/1915 ISP freezes with new firmware]* and [https://github.com/raspberrypi/firmware/issues/1904 Raspberry Pi 5 firmware ignores and responds with incorrect frame buffer pixel depth information]