3,252
edits
Changes
{{GD Template Impl}}
[[File:X1205-IMG-9071.jpg|thumb|right|X1205 UPS Shield for RPi 5]]
[[File:X1205-V1.1-Overview.jpg|thumb|right|X1205 UPS Shield for RPi 5]]
[[File:X1205-IMG-7240-Interface.jpg|thumb|right|X1205 Raspberry Pi 5 UPS-Interface]]
[[File:X1205-IMG-9058.jpg|thumb|right|X1205 Raspberry Pi 5 UPS-Battery Requirement]]
[[File:X1205-IMG-6837-How-to-Power.jpg|thumb|right|How to Power X1205 Raspberry Pi 5 UPS]]
[[File:X1205-V1.1-Overview-1.jpg|thumb|right|X1205 UPS Shield for RPi 5]]
==Safety Instructions & Warnings==
* <span class="tb_red">You must read these safety instructions and warnings before charging your batteries.
'''Seamless Power Switching:''' Equipped with AC power loss and power adapter failure detection, the X1205 seamlessly switches to backup power in the event of a power outage or power adapter failure. This feature guarantees that your Raspberry Pi remains operational and protected from unexpected power disruptions.
'''Convenient Features:''' The X1205 offers convenient features such as '''auto power-on''' and '''always power-on''', enabling your Raspberry Pi to automatically boot up when power is restored. It also supports full power-off from software, allowing you to safely shut down your Raspberry Pi without manual intervention.
'''Fast Charging:''' With fast charging capabilities of up to 3000mA, the X1205 ensures quick recharging of the UPS, making it ready to provide backup power whenever needed.
'''<span class="tb_red">What is the difference between [[X1205]] and [[X1200]]:</span>'''
*X1205 uses a wide voltage power input (9V-18V);
<!--
*Solves the overheating problem of DC jack power supply
-->
*Uses a higher capacity '''21700''' lithium battery to provide longer power supply time;
* The power supply capacity through the DC jack is greatly increased from 5.5A of [[X1200]] to 10A
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features a 42-cell 21700 battery holder, supporting up to 2010,000mAh with four two 21700 batteries
|-
|'''Power Input'''||
* Integrated high-efficiency step-down DC-DC converter
* Wide operating input range of 9V to 18V, strongly recommen recommend [[PSU60 | Geekworm 12V 5V 5A Power supply]]
* Up to 95% efficiency for optimal power conversion
<!--* Provides up to 5.5A output current, enabling 3A fast charging while powering the system-->
* The Wide 6-18V Input allows the user to choose the power supply flexibly. The required current is greater than or equal to 3A.
* The reserved 6-18V XH2.54 connector provide convenient power supply when integrate this ups shield with other products.
* <span class="tb_red">A good quality power adapter is very important,Most of the problems you encounter are usually caused by using a poor quality power supply.Strongly recommen recommend [[PSU60 | Geekworm 12V 5V 5A Power supply]]</span>
|-
| '''Notes''' ||
*1 x X1205 UPS Shield
*4 x CM2.5*4 screws
[[File:X1205-IMG-9057-packing-list.jpg|500px]]
==User Manual==
* Hardware How to get x1205 work: [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1205 Software]* Low voltage warning solution for X120x Series UPS: [[File:IMG-7278-Low-Voltage.jpg | 700px]]* Installation GuideInstallationVideo https: //youtu.be/3SlSlXrQ2s0{{#ev:youtube|https://youtu.be/3SlSlXrQ2s0}} ==Matching Case==X1205-C1 case is designed for the raspberry pi 5 & X1205 ups shield only, also with space reserved on the top for mounting the Raspberry Pi 5 PIP boards, such as the X1001, X1004, X1003, X1000 and M901.* How to make it workCase dimensions:91 x 76 x 64 mm / 3.58 x 2.99 x 2.52 inches<gallery>01-X1205-C1-IMG-9136.jpg|X1205-C102-X1200-C1-IMG-8152-layer.jpg|X1205-C1 Application03-X1205-C1-IMG-9137-Interface.jpg|X1205-C1 Interface-Front04-X1205-C1-IMG-9135-Interface-1.jpg|X1205-C1 Interface-Rear05-X1205-C1-IMG-9138-size.jpg|X1205-C1 Dimension06-X1205-C1-IMG-8202-Packing_List.jpg|X1205-C1 Accessories</gallery>
==FAQ==
<!--Add review function! -->
<!--Please choose the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
se the -->
<!--Remove other categories, just keep the appropriate categories -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]