3,080
edits
Changes
no edit summary
{{GD Template Impl}}
[[File:X1501-IMG-9222-Interface.jpg|right|thumb|X1501 CM5 IO Carrier Board-Interface]]
[[File:X1501-IMG-9216-SSD.jpg|right|thumb|X1501 CM5 IO Carrier Board]]
[[File:X1501-IMG-9242.jpg|right|thumb|X1501 CM5 IO Carrier Board]]
[[File:X1501-IMG-9382.jpg|thumb|right|Support Hailo-8 AI Accelerator]]
[[File:X1500-X1501-compare.jpg|thumb|right|X1500 VS X1501]]
==Overview==
The '''X1501''' is a purpose-built '''IO board''' tailored '''for the Raspberry Pi Compute Module 5 (CM5)''' that integrates '''dual Ethernet connectivity''' (1GbE and 2.5GbE), '''two full-size M.2 NVMe slots''', and a range of peripherals into an ultra-compact design. This carrier board is engineered to simplify system development, enabling you to quickly build solutions using readily available off-the-shelf components, such as existing Raspberry Pi HATs and M.2 NVMe devices.
For ease of integration, the board features a streamlined layout with major user connectors positioned along one edge, making enclosure design straightforward and efficient. Whether you're developing with the Compute Module 5 or deploying it as part of an embedded end product, the X1501 is designed to meet your needs with flexibility and performance.
{{CM5 IO Board}}
==Features==
* '''Dual M.2 2280 NVMe SSD Slots''': Supports up to 8TB (4TB+4TB) via PCIe 2.0 (5Gbps) for fast data transfers and boot times, compatible with M.2 NVMe SSDs in '''2280, 2242, and 2230 form''' factors.
* '''Dual HDMI 2.0 Ports''': Enables dual 4K display output for multimedia or industrial use cases.
* '''Dual MIPI DSI/CSI-2 Connectors''': 22-pin FPC connectors (0.5mm pitch) compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display integration.CAM/DISP 0 supports both displays or cameras. CAM/DISP 0 supports using a signal to power down the camera to save power. CAM/DISP 1 typically needs two jumpers fitting to '''J6''' to route the I2C signals form the GPIO connector to the camera connector. CAM/DISP 1 can be be used with displays and cameras. If it is used with a camera, it isn’t possible to power down the camera. Also refer to [https://datasheets.raspberrypi.com/cm5/cm5io-datasheet.pdf Raspberry Pi Compute Module 5 IO Board datasheet (Page 5)]
* '''MicroSD Card Slot''': Supports Compute Module 5 Lite variants (without onboard eMMC).
* '''Raspberry Pi HAT+ Compatibility''': Reuse existing Raspberry Pi HATs to save time and reduce development costs.
'''Connectivity''':
* 1 x USB-C (Power in and OS image loading)
* 1 x 1Gigabit RJ45 Ethernet with PoE+ HAT+ support '''<span class="tb_red">(requires separate Raspberry Pi PoE+ HAT+)'''</span>
* 1 x USB2.0 Type-A
* 1 x USB3.0 Type-A
* 2.54mm jumer cap x2
* M2*3 screw x 6
[[File:X1501-IMG-9222-Packing-List-New.jpg|600px]]
==User Manual==
* Hardware Installation: [https://suptronics.com/Raspberrypi/cm5/x1501-v1.0_hardware.html X1501 Hardware]
* How to make it work: [https://suptronics.com/Raspberrypi/cm5/x1501-v1.0_software.html X1501 Software]
===Video Guide===
Installation Video: https://youtu.be/H1vgT2lrJQI
{{#ev:youtube|https://youtu.be/H1vgT2lrJQI}}
==Matching Case==
==FAQ==
<!--Add review function! -->
[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]