5,374
edits
Changes
no edit summary
<span class="tb_red">Geekworm PCIe to NVME Sets:</span>
After the release of the [https://www.raspberrypi.com/products/ai-kit/ Raspberry Pi AI Kit], we tested four PIPs: [[X1001]], [[X1004]], [[X1011]], and [[M901]]. X1001, X1004, and M901 all support the hailo-8 ai accelerator, but X1011 does not.
It should be noted that [[X1004]] uses [https://www.asmedia.com.tw/product/213yQcasx8gNAzS4/b7FyQBCxz2URbzg0 ASMedia ASM1182e] PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to enable PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch, and speed is still PCIe Gen 2.0 5Gbps speed. when you use an hailo-8 ai accelerator, Raspberry Pi Fundation highly recommends using PCIe 3.0 to achieve best performance with your AI Kit.
'''Our tentative conclusions are as follows:'''
* If you need to use hailo-8 ai accelerator with high performance, it is recommended to use [[X1015]]/[[X1002]]/[[X1003]]/[[M901]]/ [https://www.raspberrypi.com/products/m2-hat-plus/ the official M.2 HAT+] etc. When choosing these PIP boards, '''you should focus on whether there is a conflict between the camera cable and the PIP board installation''', and enable PCIe3.0 to use hailo-8 ai accelerator. At the same time, you need to prepare an SD card as the system disk.
* If you don't care about the high performance brought by PCIe 3.0, then you can consider using [[X1004]], so that you can use any socket of X1004 to install NVME SSD as the system disk, and another socket to install hailo-8 ai accelerator, so as to have both.
{| class="wikitable"
! Model !! Compatible with !! Position!! NVMe M2 SSD Length Support!! Matching Case !! Matching Cooler !! Support NVMe Boot !! OtherSupport PCIe 3.0 !! Support Hailo-8 AI Accelerator
|-
| [[X1000]] || Raspberry Pi 5 || Top|| 2230/2242 NVMe M2 SSD|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||Not tested
|-
| <mark>[[X1001]] </mark> || Raspberry Pi 5 ||Top|| 2230/2242/2260/2280 NVMe M2 SSD|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||<span class="tb_red">Yes</span>
|-
| <mark>[[X1002]] </mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>|| 2230/2242/2260/2280 NVMe M2 SSD|| [[P580]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||Not tested
|-
| <mark>[[X1003]] </mark> || Raspberry Pi 5 ||Top || 2230/2242 NVMe M2 SSD|| [[P579]] / [[P425]] / [https://www.raspberrypi.com/products/raspberry-pi-5-case/ Raspberry Pi 5 Official case]||Yes||only can be used with [[H500| Raspberry Pi 5 Official Active Cooler]] or / [[H501]]<span class="tb_red">Only</span>||Yes||-||Not tested
|-
| <mark>[[X1004]] </mark> || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual 2280ssd</span> NVMe M2 SSD: 2280|| [[P579|P579-V2]]||supports NVMe boot with the latest eeprom [[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes (Requires EEPROM 2024/05/17 versionand above)||NO||<span class="tb_red">Yes</span>
|-
| <mark>[[X1011X1015]] </mark> || Raspberry Pi 5 ||<span class="tb_red">Bottom</span>Top|| <span class="tb_red">4PCS</span> 2230/2242/2260/2280 NVMe M2 SSD|| Will releason soon[[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|supports NVMe boot with the latest eeprom (2024Argon THRML Cooler]] /05[[H505]]/17 version)[[H501]]||Yes||-||<span class="tb_red">Yes</span>
|-
| <mark>[[M901X1005]] </mark> || Raspberry Pi 5 ||Top<span class="tb_red">Bottom</span>|| <span class="tb_red">Dual ssd</span>: 2230/2242/2260/2280 NVMe M2 SSD|| No matching case yet||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[P579H501]]||Yes(Requires EEPROM 2024/05/17 version and above)||NO||<span class="tb_red">Yes</span>
|-
| <mark>[[Q100X1011]] </mark> || Raspberry Pi 5 ||Top<span class="tb_red">Bottom</span>|| <span class="tb_red">4 ssds</span>: 2230/2242 NVMe M2 SSD/2260/2280|| [[X1011#Matching_Case | X1011-C1]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC| Argon THRML Cooler]] / [[H505]]/[[P579H501]]||Yes(eeprom 2024/05/17 and later VER)||With 1.3" 240x240 Color TFTNO||NO
|-
| [[Q200M901]] || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual 2230/2242/2260/2280</span> NVMe M2 SSD|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||<span class="tb_red">NOYes</span>||
|-
| [[M300Q100]] || Raspberry Pi 5 ||Top|| 2230/2242 NVMe M2 SSD|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||Not tested
|-
| [[Q200]] || Raspberry Pi 5 ||Top|| <span class="tb_red">Dual ssd</span>: 2280|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||<span class="tb_red">NO</span>||-||Not tested|-| [[M300]] || Raspberry Pi 5 ||Top|| 2230/2242|| [[P579]]||[[H500|Official Cooler]] / [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||Not tested|-| [[M400]] || Raspberry Pi 5 ||Top|| 2230/2242/2280 NVMe M2 SSD|| [[P579]]||[[H500|Official Cooler]]/ [[Argon THRML 30-AC|Argon THRML Cooler]] / [[H505]]/[[H501]]||Yes||-||Not tested
|}