2,288
edits
Changes
Jump to navigation
Jump to search
[[File:X863-A3-ACCE.jpg|thumb|right|X630-A3 V1.2 Packing List (Sold out)]]
'''The PiKVM-A3 is composed of follow parts:''' [[File:IMG20220616171152-970x600.jpg|700px|RPIKVM-A3]]* '''[[X630]]''' HDMI to CSI-2 Board (for video capture)* '''[[X630-A3]]''' HAT Board (for ethernet, cooling, RTC, ATX Control power in etc)* '''[[X630-A5]]''' Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case))* '''[[0.96 inch OLED Shield |0.96 inch OLED]]''' (for display, Resolution: 128×64 pixel)* Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable) '''Note:''' Please use the supplied USB Type-C to USB 2.0 A-Male Cable only. USB-C to USB-A cable only with DATA lines (for keyboard and mouse emulation), Using other cable might cause instability or damage to either the host PC or the Pi. We need to ensure you isolate the 5v connection between the Raspberry Pi and host PC to prevent backpower issues that can cause instability or damage to either the host PC or the Pi. Some PC case may not have HDMI port, you need to use VGA/DVI to HDMI adapter to transfer HDMI port. ===Features===
='''ATX Conrol cable:''' You can make your own ATX control cable, in fact, it is a normal Ethernet cable, and the requirements must be '''568B''' line sequence [[File:RJ75-568B.png]] '''RJ45 Pinout of KVM:''' [[File:RJ45-PINOUT.png]] ==How to Power===
===How to Cool===
[[File==User Manual==First you need to make sure your hardware connections are correct, please refer to the video and diagram below===Installation Video===PiKVM-A3 Kit:https://youtu.be/KrpHCsK7veA (Note: the X630-A5A3 V1.2 has been updated to X630-IMGV1.3 and remove one on-4214-700pxboard spacer to simplify the installation.jpg) {{#ev:youtube|frame|none| '''X630-A5 Adapter board''']]https://youtu.be/KrpHCsK7veA}}
{{#evFirstly, insert the '''CR1220''' button battery. run the following command in web terminal window:youtube|https://youtu.be/KrpHCsK7veA}}
==User Manual==1. switch to 'root'user su rootthen type the password, and the default password is 'OS download:''root' https://pikvmalso.org/download/
For Raspberry Pi 4, please use [https://files2.pikvmSwitch OS to writable mode rw3.orgEdit the /imagesboot/v3config.txt file, and change line <code>dtoverlay=i2c-hdmirtc,pcf8563</code> to <code>dtoverlay=i2c-rpi4-box-latestrtc,ds1307</code> (due to use the different RTC chip).img.xz PiKVM V3 platform] sudo nano /boot/config.txtThen save & '''reboot''' the device;
[[File:Pi44.Test & setting RTC, write&read the time of Raspberry Pi to RTC DS1307 date sudo hwclock -V3w sudo hwclock -HAT.png|800px|PiKVM V3 platform]]r
'''PS:'''5. Swith OS to readonly mode ro
We recommend that ===Enable OLED display===Run the following command in web terminal window to enable OLED display: rw systemctl enable --now kvmd-oled roIf you use the ''''are using <code>PiKVM OS V3 Pre-Assembled'''' version</code>, and this image includes the OLED display configurationis already pre-installed, you can ignore this step.
But due ===Enable hdmi audio===Refer to different RTC chips, you still need to configure RTC to make RTC work normally, please refer to the following '''FAQ#Q: How to enable RTC'''[[Enable pikvm hdmi audio]]
<htmL>
<details><summary>How to enable RTC?</summary><p>A[[File: Firstly, insert the C1220 button battery. run the following command:</p>pre>rwsudo nano /boot/config.txt#Then change the line: dtoverlay=i2cPi4-rtc,pcf8563 to dtoverlay=i2cV3-rtc,ds1307HAT.png|800px]]
#Test RTC#Display 2. Please check if the current time order of the Raspberry Pidate #Write the time of Raspberry Pi to DS1307sudo hwclock -wOLED screen pins is correct, please contact us if it's a wrong pin order;
#Read the time of DS1307sudo hwclock [[File:OLED-rro</pre></details>IMG-4373-1.jpg]]
<details><summary>Why OLED is not display?</summary><p>A: Please follow then runt the steps below following command to check</p>i2c address<p>1. Please confirm that your OS is right:</p><p>Due to downloading the wrong firmware, the OLED cannot be displayed. We ALSO made such mistakes during testing.</p><p><a href="/File:Pi4 sudo i2cdetect -V3-HAT.png" class="image"><img alt="Pi4-V3-HAT.png" src="/images/thumb/b/be/Pi4-V3-HAT.png/800px-Pi4-V3-HAT.png" decoding="async" width="800" height="616" srcset="/images/thumb/b/be/Pi4-V3-HAT.png/1200px-Pi4-V3-HAT.png y 1.5x, /images/b/be/Pi4-V3-HAT.png 2x" data-file-width="1443" data-file-height="1112"></a></p><p>2. Please check if the order of OLED screen pins is correct, please contact us if it's a wrong pin order;</p><p><a href="/File:OLED-IMG-4373-1.jpg" class="image"><img alt="OLED-IMG-4373-1.jpg" src="/images/6/6e/OLED-IMG-4373-1.jpg" decoding="async" width="864" height="710" data-file-width="864" data-file-height="710"></a></p><pre>pi@raspberrypi:~ $ sudo i2cdetect -y 1
<p>3c is a hexadecimal number, it is the I2C address of OLED, if you can’t find this value, please shut down and reconnect X630-A3&OLED and run this command again, If you still can't find the OLED's I2C address, the OLED screen may be damaged.</p>
<p>4. Then run the following command to enable OLED display:</p>
<pre>
rw
systemctl enable --now kvmd-oled
ro
</pre>
</details>
<details>
<summary>I want to control several pc power. Is it possible with one PiKVM-A3 and several x630-a5</summary>
<p>A. No, one kit can only control one pc, you can refer to <a href="/X680" title="X680">X680</a></p>
</details>
<details>
<summary>There is a I2S Audio In on X630-A3, does the packing list contain an I2S cable? How to connect it?</summary>
<p>A. No contain an I2S cable. We will add the I2S cable soon.</p>
<p>PiKVM OS does not support I2S, so it cannot be used yet.</p>
<p>The 10pin SH1.0 connector is for '''future''' I2S HDMI audio support. Once it supported, we will update the product information for detail use.</p>
</details>
<details>
<summary>How to login?</summary>
<p>A: Input the XX.XX.XX.XX ip address on the explorer, then input user: admin, the default password is 'admin' also.</p>
</details>
<details><summary>How to switch root user?</summary><p>A: '''3c''' is a hexadecimal number, it is the I2C address of OLED, if you can’t find this value, please shut down and reconnect X630-A3&OLED and run this command again, If you still can't find the following command:</p><pre>su root#default password is root also</pre></details>OLED's I2C address, the OLED screen may be damaged.
<details>4. Then run the following command to enable OLED display:<summary>Why the device does not show the video?</summary> rw<ul><li>Double systemctl enable --now kvmd-check that the video capture device is connected correctly and tightly. For the CSI bridge, this should be exactly the camera port;</li>oled <li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li> ro<li>Your computer may have turned on sleep mode for the monitor. Move the mouse to turn it off.</li></uldiv></detailsdiv>
no edit summary
[[File:KVM-A3-IMG-4402-main.jpg|thumb|right|X630+X630-A3+KVM-C3 Case for Pi4]]
[[File:X630-A3-IMG-4235.jpg|thumb|right|X630+X630-A3]]
[[File:X630-a3-02.jpg|thumb|right|X630+X630-A3-I2S Cable Connection]][[File:X630-A3-IMG-4237.jpg|thumb|right|X630+X630-A3-I2S Cable Connection]]
[[File:X630-IMG-2718.jpg|thumb|right|X630 HDMI to CSI-2 Module]]
[[File:X630-A3-V1.3-ACCE.jpg|thumb|right|X630-A3 V1.3 Packing List]]
[[File:X630-A5-acc.jpg|thumb|right|X630-A5 Packing List]]
[[File:X630-A5-IMG-4210-2.jpg|thumb|right|X630-A5]]
[[File:X630+X630-A3+X630-A5+0.96寸OLED+Ethernet.jpg|thumb|right|PiKVM-A3: X630+X630-A3+X630-A5+OLED for Pi 4]]
==Update History==
X630-A3 (The core expansion shield of this kit) was updated from V1.2 to '''V1.6''' in October 2023.
# Support WatchDog
# RTC function can be used directly, no need to configure.
# I2S audio cable added.
[[File:X630-a3-01-I2S-cable.jpg|500px]]
==Overview==
PiKVM-A3 is a member of the [[PiKVM]] <ref>PiKVM © belongs to https://pikvm.org</ref> family, which supports Raspberry Pi 4 with a matching metal case.
* Designed especially for PiKVM ( Raspberry Pi based KVM over IP)
* For use with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB
* Fully compatible with PiKVM OS (refer to user manual)
* <span style="color:red;">Only compatible with '''PiKVM V3 OS''', NOT support '''V4'''</span>
* Control a server and computer using a web browser
* HDMI Full HD capture based on the TC358743 chip
* Reserves the 4pin header & spacers for I2C OLED display
===Matching Case (Model is KVM-C3)==='''KVM-C3''': Case for Raspberry Pi 4 and PiKVM-A3, not support raspberry pi 3 B+ / 3B. [[File:KVM-A3-IMG-4402-main-2.jpg|800px]] '''KVM-A3 Packing List'''* PiKVM-A3 Metal Case* 4 x M2.5*5+5mm Spacers* 4 x KM2.5*4mm Screws* 1 x 4pcs non-slip rubber pads * 1 x sponge sticker ===Packing List===
*'''1 x 0.96 inch OLED''': Resolution: 128×64 pixel, with 2 piece of M2*6 screws
*'''1 x ATX Conrol Ethernet Cable''' (Cable length: 100cm)
*'''1 x X630 HDMI to CSI-2 Module'''
** 1 x FFC Cable(5cm length)
*'''1 x X630-A3 V1.2 Expansion Board'''(V1.2/V1.3/V1.6)
** 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
** 4 x M2.5x20mm F/F Spacers
** 1 x ATX Control Cable (Cable Length: 47cm / 18.50 inch)
* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A3)
* '''DON'T''' power via raspberry pi's TYPE-C port, because it is occupied as USB OTG.
* For use with raspberry pi 4, [[X630-A3]] (PiKVM-A3) equipped with a active cooling fan that cool your raspberry pi;
* For use with raspberry pi 4, [[X630-A8]] (PiKVM-A8 PCIe version) equipped with a active cooling fan that cool your raspberry pi;
==Hardware Parameters==
[[File:X630-A3-Interface-700px.jpg|frame|none| '''X630-A3 + X630''']][[File:X630-A5-IMG-4214-700px.jpg| '''X630-A5 Adapter board''']]
===Connection Diagram===
'''1. The PiKVM-A3 is composed of follow parts:'''
[[File:IMG20220616171152-970x600.jpg|700px|RPIKVM-A3]]
* '''[[X630]]''' HDMI to CSI-2 Board (for video capture)
* '''[[X630-A3]]''' HAT Board (for ethernet, cooling, RTC, ATX Control power in etc)
* '''[[X630-A5]]''' Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case))
* '''[[0.96 inch OLED Shield |0.96 inch OLED]]''' (for display, Resolution: 128×64 pixel)
* Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
'''Note:'''
:<span style="color:red;">Please use the supplied USB Type-C to USB 2.0 A-Male Cable only. USB-C to USB-A cable only with DATA lines(for keyboard and mouse emulation) and no power supply, Using other cable might cause instability or damage to either the host PC or the Pi.
:We need to ensure you isolate the 5v connection between the Raspberry Pi and host PC to prevent backpower issues that can cause instability or damage to either the host PC or the Pi.
:Some PC case may not have HDMI port, you need to use VGA/DVI to HDMI adapter to transfer HDMI port, but VGA to HDMI adapter may not be compatible with PiKVM-A3
'''2. Connection Diagram'''
[[File:PiKVM-A3A4-Connection.jpg|700px|PIKVM-A3 PiKVM-A4]]
#The black and red wires(wire group ②) come from X630-A5 accessories.
===OS Download & Installation Video===1. Firstly, need prepair a micro sd card, a minimum 16 Gb class 10 memory card is recommended. 2. Download an appropriate OS image for the PiKVM, the url link is: https://pikvm.org/download/ :We recommend that you use the ''''V3 Pre-Assembled'''' version, and this image includes OLED display configuration. :For Raspberry Pi 4, please use [https://files.pikvm.org/images/v3-hdmi-rpi4-box-latest.img.xz PiKVM V3 platform]. <span style="color:red;">Only compatible with '''PiKVM V3 Platform OS''', NOT support '''V4'''</span> :[[File:Pi4-V3-HAT.png|800px|PiKVM V3 platform]] 3. Flash it to a microSD memory card by following [https://docs.pikvm.org/flashing_os the simple instructions] or [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-A3 Kitsystem Official installation tutorial] 4. Power the device, then open explore to login the pikvm web ui. 5. Blog sharing for reference: https://youtuwww.andysblog.bede/KrpHCsK7veA (Notekvm-over-ip-pikvm-als-bausatz ===Enable RTC ===<span style="color: red;">Only need to configure the RTC function for the X630-A3 V1.5/V1.3/V1.2 has been updated to version, X630-A3 V1.3 and remove one on-board spacer 6 don't need.</span> Due to different RTC chips with official PiKVM hardware, you still need to '''configure RTC''' to simplify the installationmake RTC work normally.)
==FAQ==
* You can post a issue ticket at [https://geekworm.com/community/forum/topic/78220/pikvm-faq Geekworm forum] or email to us (support@geekworm.com) and attached your installation pictures or videos to get some help.
* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz
<detailsdiv class="toccolours mw-collapsible mw-collapsed"><summary>How to switch to root user?</summarydiv style="font-weight:bold;line-height:1.6;"><p>AQ1: run Which pins are available on the following command:KVM-A3?</pdiv><pre>su root</prediv class="mw-collapsible-content"><p>Then type the passwordA: You only can use GPIO16,26,11,17,25,9, the default password is 'root' also.10 pins on KVM-A3</pdiv></detailsdiv>
<detailsdiv class="toccolours mw-collapsible mw-collapsed"><summarydiv style="font-weight:bold;line-height:1.6;">Q2. Why the device does not show the video only display <b><span class="tb_red">No Signals</span></b>?</div><div class="mw-collapsible-content">A: * Please check the hardware connection. Double-check that the video capture device is connected correctly and tightly.* Make sure you use the original HDMI port. If your desktop only has a VGA display port, there may be no video signal when you use VGA to HDMI adapter, and there is no way to solve this; However, you can try to lower the resolution and restart the PC to test, but the probability of success is very low.* Change the HDMI cable to test.* Test the X630 separately to check if there is HDMI output.* Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).* Your computer maybe enter sleep mode, please exit sleep mode</div></div> <div class="toccolours mw-collapsible mw-collapsed"><div style="font-weight:bold;line-height:1.6;">Q3. How to login pikvm?</div><div class="mw-collapsible-content">A: Input the XX.XX.XX.XX ip address on the web explorer, then input user: admin, the default password is 'admin' also.</div></div></div> <div class="toccolours mw-collapsible mw-collapsed"><div style="font-weight:bold;line-height:1.6;">Q4. How to switch to root user?</div><div class="mw-collapsible-content">A: run the following command: su rootThen type the password, the default password is 'root' also.</div></div> <div class="toccolours mw-collapsible mw-collapsed"><div style="font-weight:bold;line-height:1.6;">Q5. How to enable OLED display?</summarydiv><pdiv class="mw-collapsible-content">A: Run the following command to enable OLED display: rw systemctl enable --now kvmd-oled ro</div></pdiv>
<prediv class="toccolours mw-collapsible mw-collapsed">rwsystemctl enable <div style="font-weight:bold;line-now kvmd-oled height:1.6;">roQ6. Why OLED is not display?</prediv></detailsdiv class="mw-collapsible-content">A: Please follow the steps below to check 1. Please confirm that your OS is right: Due to downloading the wrong firmware, the OLED cannot be displayed. We ALSO made such mistakes during testing.
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
</pre>
<div class="toccolours mw-collapsible mw-collapsed"><div style="font-weight:bold;line-height:1.6;">Q7. I want to control several pc power. Is it possible with one PiKVM-A3 and several x630-a5</htmldiv><div class="mw-collapsible-content">A. No, one kit can only control one pc, you can refer to [[X680]] to control up to 4 PCs.</div></div>
==References==
<references />
<!--Add review function! -->