5,374
edits
Changes
Jump to navigation
Jump to search
====* How to flash OS onto the eMMC of CM4? (CM4 with eMMC)?====
X680
,==Overview==
'''Update:'''
X680 is upgraaded from V1.3 to V1.5 from June 2024， adding the following features:
* Supports switching between hosts in the web UI
* Supports HDMI input resolutions up to 1920x1080 at 60Hz
PS: Need to do the corresponding configuration
This X680 is a member of the [[PiKVM]]<ref>PiKVM © belongs to https://pikvm.org</ref> family, it is a 4-port IP KVM Switch empowers you to securely manage up to four computers/servers remotely from almost anywhere using the internet or your local area network (LAN).
3. Then power the device, then open explore to login the pikvm web ui.
1. Short nBOOT Pin, refer to the picture below.