2,281
edits
Changes
Jump to navigation
Jump to search
{{GD Template Impl}}
==Safety Instructions & Warnings==
* <span class="tb_red">'''The charging current is set to 2.3-3.2A and charge cut-off voltage is 4.23V. Before connecting your battery to the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.'''</span>
* It is essential to read and understand these safety instructions and warnings before charging your batteries.
* <span class="tb_red">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury, and damage to property if charged or used improperly.</span>
* Never make a wrong polarity connection when charging or discharging battery packs. <span class="tb_red">Always double-check the polarity of the battery's connector to ensure that "+" is connected to "+" and "-" is connected to "-".</span>
* <span class="tb_red">Do not mix and use old batteries with new batteries, or batteries with different brand names.</span>
* Lithium batteries have a limited cycle life. Please replace old batteries with new ones when they reach their service life or when they are two years old, whichever comes first.
* When charging the Battery Pack, please <span class="tb_red">place the battery in a fireproof container</span>. Do not leave the UPS shield on wood material or carpet unattended.
* Keep the UPS shield<span class="tb_red"> away from children</span> to ensure their safety.
* Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/
* Battery Recommend for Geekworm UPS board, please refer to: [[File:NCR18650B.pdf|X728 battery recommend]]
==Overview==
X1203 is an innovative uninterruptible power supply (UPS) expansion board designed specifically for the Raspberry Pi 5B. With its advanced features and robust power backup capabilities, the X1203 is perfect for even the most demanding Raspberry Pi setups.
| '''Key Features''' ||
'''UPS Output'''
* Provides continuous operation for up to 10 hours '''(duration depends on battery type and applications)'''
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* '''Features two XH2.54 battery connectors'''
'''Power Input'''
'''PCB Size:''' 85mm x 68mm
|-
|Important Notes:||
* <span class="tb_red">Do not apply power to your Raspberry Pi via the Type-C USB socket.</span>
* Do not use 18650 battery with built-in protection circuit.
|}
==Packing List==
* X1203 V1.0 UPS shield x 1
* Screw pack x 1
==User Manual==
===Hardware Installation===
[https://suptronics.com/Raspberrypi/Power_mgmt/x1203-v1.0_hardware.html X1203 Hardware]
===Software Installation===
[https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1203 Software]
==FAQ==