5,251
edits
Changes
Jump to navigation
Jump to search
no edit summary
<span class="tb_red">NVMe SSD Incompatibility List:</span>
We recommend avoiding the following NVMe SSD drives which is equipped with a '''Phison controller''' due to their proven incompatibility:
* WD Blue SN550/SN580 series (<span class=="tb_red_bold">Solved! </span> Refer to [https://forums.raspberrypi.com/viewtopic.php?t=364327 New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.])* WD Green SN580 series
* WD Green SN350 series
* WD Black SN850 series
-->
These specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for the X10xx series NVMe shield. You can run "'''lspci'''" command to check the controller brand of the SSD.
<!--
We hope the Raspberry Pi Foundation will resolve this issue soon.
-->
<span class="tb_red">Also note:</span>
* Compatible with M.2 '''NVMe''' SSDs only, '''Not''' compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
* We get feedback from customers that '''Polaris Controller''' will also have compatibility problems. Please replace the other SSD test if it not work, whether it is compatible with the Raspberry Pi 5 does not depend on the X100X series boards
<!-- from: https://shop.pimoroni.com/products/nvme-base?variant=41219587178579 -->
'''<span class="tb_red_bold">PS: There is also feedback from buyers that even NVME SSDs with ''Phison controller'' are supported after updating the latest firmware. Please refer to go to: [[X1001#comment-4638]]</span>'''