Changes

X1202

9,818 bytes added, 25 April

→‎User Manual

[[File:X1202-V1.1-IMG-7247-Interface-NEW.jpg|thumb|right|Interface]]

[[File:X1202 V1.1-IMG-7244.jpg|thumb|right| X1202 front view]]

[[File:X1202 V1.1-IMG-7242.jpg|thumb|right| X1202 back view]]

[[File:X1202 V1.1-IMG-7251.jpg|thumb|right|X1202 Use]]

[[File:X1202 V1.1-IMG-7258.jpg|thumb|right|X1202 with Active cooler]]

==SAFETY INSTRUCTIONS AND WARNINGS==

* <span style="color:red;">You must read these safety instructions and warnings before charging your batteries.

* <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.

* <span style="color:red;">Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".

* <span style="color:red;">Do not mix and use old batteries and new batteries, or batteries with different brand names.

* <span style="color:red;">Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.

* <span style="color:red;">When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X1202 on the wood material or carpet and unattended.

==Overview==

This X1202 is an ultra-compact advanced uninterruptible power supply expansion board designed specifically for the Raspberry Pi 5.With its advanced features and robust power backup capabilities, the X1202 is perfect for even the most demanding Raspberry Pi setups.

{| class="wikitable"

! Model !! Compatible with !! Position!! Battery Holder NO.!! How to Power !! Note

|-

| [[X1200]] || Raspberry Pi 5 || Bottom|| 2-Cell|| 5Vdc 5A via USB Type-C of X1200|| /

|-

| [[X1201]] || Raspberry Pi 5 ||Bottom|| 2-Cell|| 5Vdc 5A via USB Type-C of X1201|| Ultra-thin

|-

| [[X1202]] || Raspberry Pi 5 ||Bottom|| 4-Cell|| 5Vdc 5A via USB Type-C of X1202; OR 6-18Vdc, ≥3A via DC 5521 power jack of X1202|| /

|}

'''Reliable Power Backup:''' The X1202 provides a stable 5.1V 5000mA power backup, ensuring uninterrupted operation of your Raspberry Pi. Whether you are running resource-intensive applications or powering multiple peripherals, the X1202 delivers reliable and consistent power supply.

'''Enhanced Power Management:''' One of the standout features of the X1202 is its enhanced power management system. It intelligently monitors the power status of the Raspberry Pi and automatically cuts off power when the Pi is shut down. This helps optimize battery life by entering an ultra-low standby power consumption mode. It ensures efficient operation and maximizes the lifespan of the UPS battery.

'''Seamless Power Switching:''' Equipped with AC power loss and power adapter failure detection, the X1202 seamlessly switches to backup power in the event of a power outage or power adapter failure. This feature guarantees that your Raspberry Pi remains operational and protected from unexpected power disruptions.

'''Convenient Features:''' The X1202 offers convenient features such as auto power-on, enabling your Raspberry Pi to automatically boot up when power is restored. It also supports full power-off from software, allowing you to safely shut down your Raspberry Pi without manual intervention.

'''Fast Charging:''' With fast charging capabilities of up to 3000mA, the X1202 ensures quick recharging of the UPS, making it ready to provide backup power whenever needed.

'''Versatile Design:''' The X1202 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs.

'''Seamless Data Backup:''' The X1202 is compatible with our range of storage products, providing seamless integration for safe and reliable data backup. Your valuable data remains protected, even in the event of a power failure.

Enhance the reliability and performance of your Raspberry Pi 5B with the X1202 UPS expansion board. Experience peace of mind with its advanced features and robust power backup capabilities. Trust the X1202 to ensure uninterrupted operation and safeguard your valuable data.

==Features==

{| class="wikitable"

|-

| '''For use with''' ||

Raspberry Pi 5

|-

| '''Key Features''' ||

'''UPS Output'''

* Provides continuous operation for up to 10 hours (duration depends on battery type and applications)

* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications

* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss

* Convenient pogo pin connection for powering the Pi, eliminating the need for cabling and soldering

* Equipped with XH2.54 connectors and two USB sockets for 5V power output

'''Battery Charging'''

* Supports fast battery charging with a capacity of 3000mA

* Battery charging control can be managed via GPIO

* Provides protection against battery overcurrent and overvoltage

* Built-in protection against reverse connection of battery cells

* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c

* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%

* Features a 4-cell 18650 battery holder

'''Power Input'''

* Integrated high-efficiency step-down DC-DC converter

*Wide operating input range of 6V to 18V

*Up to 95% efficiency for optimal power conversion

*Provides up to 5.5A output current, enabling 3A fast charging while powering the system

*Allows power input from various sources such as a car, solder panel, and more

*Common power input jack size of 5.5x2.1mm

*Compatible with Raspberry Pi USB-C Power Supply

'''Power Management'''

* Seamless power switching between backup power and power adapter

* On-board push button performs the same actions as the Pi's power button

* Automatically cuts off power when the Pi is shut down

* On-board LED indicates power status and Pi detection

* AC power loss and power adapter failure detection via GPIO

* Auto power-on when power is applied or restored

* Automatic safe shutdown when battery voltage is low (programmable)

* Ultra-low standby power consumption to maximize battery life

* Advanced system power-path management to minimize frequent charging and discharging of batteries

'''Misc'''

* Connects to the Pi via convenient pogo pins, eliminating the need for additional cabling

* Designed to be attached on the bottom, allowing the use of favorite HATs alongside it

* XH2.54 connector available for adding your own power button

|-

| '''Spec''' ||

<span style="color:red">'''Power input:''' 6-18Vdc,(12Vdc 3A power adapter recommended)</span>

'''UPS output:''' 5.1V ±5% Max 5A

'''Battery charging current:''' Max 2.3-3.2A

'''Terminal Battery Voltage:''' 4.23V

'''Battery Recharge Threshold:''' 4.1V

'''Ports & Connectors:'''

* DC power jack - 5.5x2.1mm

* DC6-18V power input connector x1 - XH2.54-2P

* USB Type-C socket x1

* 18650 battery socket x4

* 5V Power output connector x2 - XH2.54 2-pin

* USB2.0 type-A power output socket x2

* External power button connector x1 - XH2.54-2P

'''PCB Size:''' 97.4mm x 85mm

|-

| '''Notes''' ||

* <span style="color:red">Do not apply power to your Raspberry Pi 5 via the Type-C USB socket.</span>

* Do not use 18650 battery with built-in protection circuit.

|}

==Packing List==

*1 x X1202 UPS Shield

*1 x Screw packs and accessories

==User Manual==

* Dimensions source file (DXF): [[File:X1202-pcb.dxf]] - You can view it with [https://viewer.autodesk.com/ Autodesk Viewer] online

* X1202 Hardware: [[X1202 Hardware]]

* X1202 Software: [https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1202 Software]

==FAQ==

Q: How to disable '''auto power on'''?

</div>

A: When you connect an external power supply, the UPS board will automatically power on the Pi 5 motherboard while it starts charging, this feature is called '''auto power on''', considering that some customers need to disable this feature, so we have also disclosed the following solution to disable it: please use a soldering iron to remove the resistor indicated by the arrow in the illustration.

[[File:X1202-Remove-Resistance.png|800px]]

<span class="tb_red_bold">WARNING:</span> Please consider the following risks before removing this resistor:

* Do not operate if you are not a professional user

* The removal operation may damage the MCU, so please be careful with the operation.

* Once you remove this resistor by yourself, you will lose the warranty of this product. We no longer offer any warranty for this product.

* Once you remove this resistor, you can only turn on the power output by pressing the on-board switch.

</div>

Q1: Run <code>sudo i2cdetect -y 1</code>, can't find I2C address 0x36?

</div>

A:

1. Make sure you enable i2c interface, refer to How to enable I2C

2. Please check if the pogp pin of X1202 is in close contact with the pad position of PI 5.

[[File:X1002-no-found-i2c.jpg]]

</div>

Q: What battery is recommended for this ups shield

</div>

A: Please use high quality batteries from PANPASONIC, Toshiba, etc.

Do not use the battery with built-in protection circuit.

[[File:18650_battery_size-2.jpg|800px]]

</div>

Harry

Bureaucrats, Comment administrators, Interface administrators, Administrators

5,169

edits