Changes

<span class="tb_red"><big>This tutorial is deprecated, see [[X735-script]]</big></span>  =How =Overview==This guide also applies to setup safe shutdown script??[[X735]] V3.0 / V2.5 shield； ==For Raspbian / Raspbian Lite / RetroPie / Twister OS v2.0.2==1Test '2022-04-04-raspios-bullseye-armhf-lite. Once you have logged into your Raspberry Pi from the command line, run the following commandsimg' on May 6th 2022; '''install''' 

sudo apt-get upgrade  sudo apt-get install python-smbus y git sudo apt-get install i2c-tools y pigpio python3-pigpio sudo apt-get install pigpio -y python3-smbus python3-rpi.gpio git clone https://github.com/geekworm-com/x735-v2.5 cd x735-v2.5 sudo chmod +x *.sh sudo bash install.sh echo "alias x735off='sudo /usr/local/bin/x735softsd.sh'" >> ~/.bashrc sudo reboot If reboot fails, please force shutdown or power off and restart '''Test safe shutdown''' x735off* x735off is safe shutdown command, you can run this command to safe shutdown.* press button 1-2 seconds to reboot* press button 3 seconds to safe shutdown,* press 7-8 seconds to force shutdown. '''uninstall''' sudo ./uninstall.sh '''read-fan-speed.py''' sudo python3 read_fan_speed.pyor sudo python read_fan_speed.py After a reboot, we can run ```sudo pythonread_fan_speed.py``` to get an update on the fan's current speed. '''How to make the fan script run automatically after booting?''' There are two ways to achieve it： 1. Put the command line in the /etc/rc.local file: （'''Default''') vi /etc/rc.local <source lang='shell' line highlight="21">#!/bin/sh -e## rc.local## This script is executed at the end of each multiuser runlevel.# Make sure that the script will "exit 0" on success or any other# value on error.## In order to enable or disable this script just change the execution# bits.## By default this script does nothing. # Print the IP address_IP=$(hostname -pigpio python3I) || trueif [ "$_IP" ]; then printf "My IP address is %s\n" "$_IP"fi /etc/x735pwr.sh &python /home/pi/x735-pigpiov2.5/pwm_fan_control.py&exit 0</source>

2NOTE: * The install. Download sh script and some sample codewill make sure this command line is put into the rc.local file, you don't need to do anything. git clone https://github* Please change 'python' to 'python3' if you are using python3.com/geekworm-com/X735-V2* Please make sure the file path of pwm_fan_control.5py is correct.git

42. Use crontab to add a timed task. For details, please refer to [[How to add crontab job]]. Reboot sodu reboot

==For DietPi=='''install''' sudo apt-get install -y python-smbus python python3-rpi.gpio sudo apt-get install -y pigpio python-pigpio python3-pigpio git git clone https://github.com/geekworm-com/x735-v2.5 cd x735-v2.5 sudo chmod +x *.sh sudo bash install-dietpi.sh echo "alias x735off='sudo /usr/local/bin/x735softsd'" >> ~/.bashrc sudo reboot PS: according to the customer feedback, the above shell script is also work with Citadel, please test yourself, thanks! ==For Volumio 3==Test the following script base on the 'Volumio-3.175-2021-12-13-pi.img' The default username and passpword are both 'volumio' '''install''' # Enable SSH Visit 'http://volumio.local/dev/' to click 'Enable' button to enable SSH  # install software and tools via SSH window sudo apt-get update sudo apt-get install python-smbus sudo apt-get -y install python-rpi.gpio python3-rpi.gpio # download the install script sudo git clone https://github.com/geekworm-com/x735-v2.5 cd x735-v2.5 sudo chmod +x *.sh sudo bash install-volumio3.sh  # add x735off alias echo "alias x735off='sudo /usr/local/bin/x735softsd'" >> ~/. bashrc sudo reboot '''Test safe shutdown'''

pwm_fan_control# install software and tools cd ~ sudo apt-get update sudo apt-get upgrade sudo apt-get install -y unzip make gcc git sudo apt-get install -y wiringpi python python3-pigpio python-setuptools python3-distutils python3-rpi.py gpio  This is the phthon sample file # install pigpio library, also refer to control fan speed by CPU temperaturehttp://abyz. you can refer to this sample or modify it by your requestme.uk/rpi/pigpio/download.html wget https://github.com/joan2937/pigpio/archive/master.zip unzip master.zip cd pigpio-master sudo make sudo make install  # download X735 installation scripts cd ~ git clone https://github.com/geekworm-com/x735-v2.5 cd x735-v2.5 sudo chmod +x *.sh  # create pigpiod service sudo bash create-pigpiod. please contact us if you found some error for this fileservice.sh

You can use the # create /etc/rc.local file sudo bash create-rc.local.sh # install script sudo bash install.sh # add x735off alias echo "alias x735off='crontabsudo /usr/local/bin/x735softsd.sh' system command to execute this python file to get the function of speed adjustment according to temperature changes" >> ~/.bashrc sudo reboot

How '''Test safe shutdown''' x735off* x735off is safe shutdown command, you can run this command to safe shutdown.* press button 1-2 seconds to reboot* press button 3 seconds to safe shutdown,* press 7-8 seconds to force shutdown. '''uninstall''' sudo ./uninstall.sh '''read-fan-speed.py''' sudo python3 read_fan_speed.py == For myNode OS and Umbrel ==About myNode, please refer to use crontab http://www.mynodebtc.com/ About Umbrel, please refetrto https://getumbrel.com/, we test it base on 'umbrel-os-v0.4.4.img' We tested umbrel v0.4.16 on Apr. 18th, 2022 base on 'umbrel-os-v0.4.16.img' '''Install''' login to mynode teminal via Putty or Xsheel tool, the default user name is `admin`, password is `bolt`, then run the following command: Login to mynode teminal via Putty or Xsheel tool, the default user name is `umbrel`, default password is `moneyprintergobrrr`, then run the following command: '''FAQ''' Q: What are the credentials to SSH into my Umbrel? A: ssh host is '''umbrel.local''' (or ssh <'''local IP address''' of your Umbrel>). The default user name is '''umbrel''', and the default password '''moneyprintergobrrr'''

  sudo crontab apt-eget update sudo apt-get install -y python-smbus python pigpio python-pigpio python3-pigpio git wiringpi sudo apt-get install -y python-rpi.gpio python3-rpi.gpio rpi.gpio[[File git clone https:Crontab//github.com/geekworm-step1com/x735-v2.png]]5Choose cd x735-v2.5 chmod +x *.sh sudo bash install-mynode.sh echo "1alias x735off='sudo /usr/local/bin/x735softsd.sh'" then press Enter>> ~/.bashrc sudo reboot If you fail to reboot, please unplug the power directly and restart;

Add a line at ''' PWM fan control''' The script is installed successfully and the end fan starts to run '''Test safe shutdown''' x735off* Please run 'x735off' to shut down or press the on-board button switch to shut down. <span style="color:red;">DON'T run the 'shutdown' linux command to shut down, otherwise the power of x735 will not be shut down.</span>* press button switch 1-2 seconds to reboot* press button switch 3 seconds to safe shutdown,* press 7-8 seconds to force shutdown. '''uninstall''' ./uninstall-mynode.sh ==For Version 2.1 or more low version== Please refer to '''[http://www.suptronics.com/miniPCkits/x735-hardware.html Hardware]''' and '''[http://www.suptronics.com/miniPCkits/x730-software.html Software]''' and read them and follow the file that reads like instructions before ask any questions, thank you! The safe shutdown script is same with X730. * [https://github.com/geekworm-com/x730-script Github]We test thisshell script base official Raspbian '2018-11-13-raspbian-stretch.img' version;other operating systems not be tested!<pre>#Download run script git clone https://github.com/geekworm-com/x730-script cd x730-script #Setting file attributessudo chmod +x x730.sh #Install the scriptsudo bash x730.sh #Setting up the command to turn off X730 from software printf "%s\\n" "alias x730off='sudo x730shutdown.sh'" >> ~/.bashrc

@#Reboot the Raspberry Pisudo reboot python3 /home/pi/X735-V2.5/pwm_fan_control.py

#Please note Powering off the path of this file.Raspberry Pi from software[[File:Crontab-step2.png]]x730offSave and exit. In nano, you do that by hitting CTRL + X, answering Y and hitting Enter when prompted.</pre>