* x735off is safe shutdown command, you can run this command to safe shutdown.
* press button 1-2 seconds to reboot
* press button 3 seconds to safe shutdown,
* press 7-8 seconds to force shutdown.
'''uninstall'''
sudo ./uninstall.sh
'''read-fan-speed.py'''
sudo python3 read_fan_speed.py
== For myNode OS and Umbrel ==
About myNode, please refer to http://www.mynodebtc.com/
About Umbrel, please refetrto https://getumbrel.com/, we test it base on 'umbrel-os-v0.4.4.img'
We tested umbrel v0.4.16 on Apr. 18th, 2022 base on 'umbrel-os-v0.4.16.img'
'''Install'''
login to mynode teminal via Putty or Xsheel tool, the default user name is `admin`, password is `bolt`, then run the following command:
Login to mynode teminal via Putty or Xsheel tool, the default user name is `umbrel`, default password is `moneyprintergobrrr`, then run the following command:
'''FAQ'''
Q: What are the credentials to SSH into my Umbrel?
A: ssh host is '''umbrel.local''' (or ssh <'''local IP address''' of your Umbrel>). The default user name is '''umbrel''', and the default password '''moneyprintergobrrr'''
If you fail to reboot, please unplug the power directly and restart;
</pre>
''' PWM fan control'''
The script is installed successfully and the fan starts to run
'''Test safe shutdown'''
x735off
* Please run 'x735off' to shut down or press the on-board button switch to shut down. <span style="color:red;">DON'T run the 'shutdown' linux command to shut down, otherwise the power of x735 will not be shut down.</span>
* press button switch 1-2 seconds to reboot
* press button switch 3 seconds to safe shutdown,
* press 7-8 seconds to force shutdown.
'''uninstall'''
./uninstall-mynode.sh
==For Version 2.1 or more low version==
Please refer to '''[http://www.suptronics.com/miniPCkits/x735-hardware.html Hardware]''' and '''[http://www.suptronics.com/miniPCkits/x730-software.html Software]''' and read them and follow the instructions before ask any questions, thank you!