5,305
edits
Changes
Jump to navigation
Jump to search
'''Note:''' Please use the supplied USB Type-C to USB 2.0 A-Male Cable only. USB-C to USB-A cable only with DATA lines (for keyboard and mouse emulation), Using other cable might cause instability or damage to either the host PC or the Pi. We need to ensure you isolate the 5v connection between the Raspberry Pi and host PC to prevent backpower issues that can cause instability or damage to either the host PC or the Pi. Some PC case may not have HDMI port, you need to use VGA/DVI to HDMI adapter to transfer HDMI port. ===Features===
='''ATX Conrol cable:''' You can make your own ATX control cable, in fact, it is a normal Ethernet cable, and the requirements must be '''568B''' line sequence [[File:RJ75-568B.png]] '''RJ45 Pinout of KVM:''' [[File:RJ45-PINOUT.png]] ==How to Power===
===How to Cool===
[[File==User Manual==First you need to make sure your hardware connections are correct, please refer to the video and diagram below===Installation Video===PiKVM-A3 Kit:https://youtu.be/KrpHCsK7veA (Note: the X630-A5A3 V1.2 has been updated to X630-IMGV1.3 and remove one on-4214-700pxboard spacer to simplify the installation.jpg) {{#ev:youtube|frame|none| '''X630-A5 Adapter board''']]https://youtu.be/KrpHCsK7veA}}
[[File:'''1. The PiKVM-A3A4-Connection.jpg|700px|PIKVM-A3 PiKVM-A4]]is composed of follow parts:'''
Click it [[File:IMG20220616171152-970x600.jpg|700px|RPIKVM-A3]]* '''[[X630]]''' HDMI to zoom CSI-2 Board (for video capture)* '''[[X630-A3]]''' HAT Board (for ethernet, cooling, RTC, ATX Control power inetc)* '''[[X630-A5]]''' Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case))* '''[[0.96 inch OLED Shield |0.96 inch OLED]]''' (for display, Resolution: 128×64 pixel)* Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
{{#ev:youtube|https://youtuWe need to ensure you isolate the 5v connection between the Raspberry Pi and host PC to prevent backpower issues that can cause instability or damage to either the host PC or the Pi.be/KrpHCsK7veA}}
==User Manual=='''OS download:''' https://pikvm.org/downloadSome PC case may not have HDMI port, you need to use VGA/DVI to HDMI adapter to transfer HDMI port, but VGA to HDMI adapter may not be compatible with PiKVM-A3
For Raspberry Pi 4, please use the V3 HAT OS'''2.Connection Diagram'''
==FAQ==Note:# The X630-A5 adapter board will be install into the PC Case.* First of all, we recommend you # The wire group ① connect to get more FAQ information on X630-A5 comes from the official website: [https://docs.pikvmPANEL of PC Case.org/faq/ official FAQ], or check the following FAQ;* You can post a issue ticket at [https://geekworm.com/community/forum/topic/78220/pikvm-faq Geekworm forum] or email to us #The black and red wires(support@geekworm.comwire group ②) and attached your installation pictures or videos to get some helpcome from X630-A5 accessories.* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz
'''Q2. I want to control several pc powerDownload an appropriate OS image for the PiKVM, the url link is: https://pikvm. Is it possible with one PiKVM-A3 and several x630-a5'''org/download/
A. No:We recommend that you use the ''''V3 Pre-Assembled'''' version, one kit can only control one pcand this image includes OLED display configuration.
'''Q:[[File:Pi4-V3-HAT. There is a I2S Audio In on X630-A3, does the packing list contain an I2S cable? How to connect it?'''png|800px|PiKVM V3 platform]]
A3. No contain an I2S cableFlash it to a microSD memory card by following [https://docs. pikvm.org/flashing_os the simple instructions] or [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system Official installation tutorial]
PiKVM OS does not support I2S4. Power the device, so it cannot be used yetthen open explore to login the pikvm web ui.
The 10pin SH15.0 connector is Blog sharing for '''future''' I2S HDMI audio supportreference: https://www. Once it supported, we will update the product information for detail useandysblog.de/kvm-over-ip-pikvm-als-bausatz
A: Input the XX.XX.XX.XX ip address on the explorer, then input user: adminFirstly, insert the default password is 'admin' also'CR1220''' button battery.run the following command in web terminal window:
A:4.Test & setting RTC, write&read the time of Raspberry Pi to RTC DS1307 su rootdate #default password sudo hwclock -w is root alsosudo hwclock -r
'''Q: How to enable ===Enable OLED?'''display=== A: Run the following command in web terminal window to enable OLED display:
'''==FAQ==* First of all, we recommend you to get more FAQ information on the official website: [https://docs.pikvm.org/faq/ official FAQ], or check the following FAQ;* You can post a issue ticket at [https://geekworm.com/community/forum/topic/78220/pikvm-faq Geekworm forum] or email to us (support@geekworm.com) and attached your installation pictures or videos to get some help.* Blog sharing for reference: https://www.andysblog.de/kvm-over-ip-pikvm-als-bausatz<htmL><details><summary>Q: . Why OLED is the device does not show the video only display<b><span class="tb_red">No Signals</span></b>?'''</summary> A: <ul><li>Please confirm check the hardware connection. Double-check that the video capture device is connected correctly and tightly.</li><li>Make sure you use the <span class="tb_red">original HDMI</span> port. If your OS desktop only has a VGA display port, there may be no video signal when you use VGA to HDMI adapter, and there is no way to solve this; However, you can try to lower the resolution and restart the PC to test, but the probability of success is very low.</li><li>Change the HDMI cable to test.</li><li>Test the X630 separately to check if there is right:HDMI output.</li><li>Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard).</li><li>Your computer maybe enter sleep mode, please exit sleep mode</li></ul></details>
[[File<details><summary>Q. How to login pikvm?</summary><p>A: Input the XX.XX.XX.XX ip address on the web explorer, then input user:Pi4-V3-HATadmin, the default password is 'admin' also.png|800px]]</p></details>
#Test RTC<pre> #Display the current time of the Raspberry Pirw date #Write the time of Raspberry Pi to DS1307 sudo hwclock systemctl enable --now kvmd-woled #Read the time of DS1307ro sudo hwclock -r</pre> ro</details>
'''<details><summary>Q. Why OLED is not display?</summary><p>A: Why PiKVMPlease follow the steps below to check</p><p>1. Please confirm that your OS is right:</p><p>Due to downloading the wrong firmware, the OLED cannot be displayed. We ALSO made such mistakes during testing.</p><p><a href="/File:Pi4-V3-HAT.png" class="image"><img alt="Pi4-V3-HAT.png" src="/images/thumb/b/be/Pi4-V3-HAT.png/800px-Pi4-V3-HAT.png" decoding="async" width="800" height="616" srcset="/images/thumb/b/be/Pi4-V3-HAT.png/1200px-Pi4-V3-HAT.png 1.5x, /images/b/be/Pi4-V3-HAT.png 2x" data-file-width="1443" data-file-A3height="1112"></a></A4 does not show p><p>2. Please check if the video?order of OLED screen pins is correct, please contact us if it's a wrong pin order;</p><p><a href="/File:OLED-IMG-4373-1.jpg" class="image"><img alt="OLED-IMG-4373-1.jpg" src="/images/6/6e/OLED-IMG-4373-1.jpg" decoding="async" width="864" height="710" data-file-width="864" data-file-height="710"></a></p><p>then runt the following command to check i2c address</p><pre>sudo i2cdetect -y 1</pre><pre> 0 1 2 3 4 5 6 7 8 9 a b c d e f00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- 3c -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- </pre><p>3c is a hexadecimal number, it is the I2C address of OLED, if you can’t find this value, please shut down and reconnect X630-A3&OLED and run this command again, If you still can't find the OLED's I2C address, the OLED screen may be damaged.</p><p>4. Then run the following command to enable OLED display:</p><pre>rwsystemctl enable --now kvmd-oled ro</pre></details>
A:<details>* Double<summary>Q. I want to control several pc power. Is it possible with one PiKVM-check that the video capture device is connected correctly A3 and tightlyseveral x630-a5</summary><p>A. For the CSI bridgeNo, one kit can only control one pc, this should be exactly the camera port;* Some laptops do not output any signal until you switch the output (usually via the FN + and an F5 key on the keyboard)can refer to <a href="/X680" title="X680">X680</a> to control up to 4 PCs.</p>* Your computer may have turned on sleep mode for the monitor. Move the mouse to turn it off.</details></html>
[[File:X630-A5-IMG-4210-2.jpg|thumb|right|X630-A5]]
[[File:X630+X630-A3+X630-A5+0.96寸OLED+Ethernet.jpg|thumb|right|PiKVM-A3: X630+X630-A3+X630-A5+OLED for Pi 4]]
==Update History==
X630-A3 (The core expansion shield of this kit) was updated from V1.2 to '''V1.6''' in October 2023.
# Support WatchDog
# RTC function can be used directly, no need to configure.
# I2S audio cable added.
==Overview==
PiKVM-A3 is a member of the [[PiKVM]] <ref>PiKVM © belongs to https://pikvm.org</ref> family, which supports Raspberry Pi 4 with a matching metal case. '''The PiKVM-A3 is composed of follow parts:''' [[File:IMG20220616171152-970x600.jpg|700px|RPIKVM-A3]]* '''[[X630]]''' HDMI to CSI-2 Board (for video capture)* '''[[X630-A3]]''' HAT Board (for ethernet, cooling, RTC, ATX Control power in etc)* '''[[X630-A5]]''' Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case))* '''[[0.96 inch OLED Shield |0.96 inch OLED]]''' (for display, Resolution: 128×64 pixel)* Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
* Designed especially for PiKVM ( Raspberry Pi based KVM over IP)
* For use with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB
* Fully compatible with PiKVM OS (refer to user manual)
* <span style="color:red;">Only compatible with '''PiKVM V3 OS''', NOT support '''V4'''</span>
* Control a server and computer using a web browser
* HDMI Full HD capture based on the TC358743 chip
* Reserves the 4pin header & spacers for I2C OLED display
===Matching Case (Model is KVM-C3)==='''KVM-C3''': Case for Raspberry Pi 4 and PiKVM-A3, not support raspberry pi 3 B+ / 3B. [[File:KVM-A3-IMG-4402-main-2.jpg|800px]] '''KVM-A3 Packing List'''* PiKVM-A3 Metal Case* 4 x M2.5*5+5mm Sapcers* 4 x KM2.5*4MM Screws* 1 x 4pcs non-slip rubber pads * 1 x sponge sticker ===Packing List===
*'''1 x 0.96 inch OLED''': Resolution: 128×64 pixel, with 2 piece of M2*6 screws
*'''1 x ATX Conrol Ethernet Cable''' (Cable length: 100cm)
*'''1 x X630 HDMI to CSI-2 Module'''
** 1 x FFC Cable(5cm length)
*'''1 x X630-A3 V1.2 Expansion Board'''(V1.2/V1.3/V1.6)
** 1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
** 4 x M2.5x20mm F/F Spacers
** 1 x ATX Control Cable (Cable Length: 47cm / 18.50 inch)
* Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A3)
* '''DON'T''' power via raspberry pi's TYPE-C port, because it is occupied as USB OTG.
* For use with raspberry pi 4, [[X630-A3]] (PiKVM-A3) equipped with a active cooling fan that cool your raspberry pi;
* For use with raspberry pi 4, [[X630-A8]] (PiKVM-A8 PCIe version) equipped with a active cooling fan that cool your raspberry pi;
==Hardware Parameters==
[[File:X630-A3-Interface-700px.jpg|frame|none| '''X630-A3 + X630''']][[File:X630-A5-IMG-4214-700px.jpg| '''X630-A5 Adapter board''']]
===Connection Diagram===
'''Note:# The X630-A5 adapter board will be install into the PC Case.# The wire group ① connect to X630-A5 comes from the PANEL of PC Case.#The black and red wires(wire group ②) come from X630-A5 accessories.'''
:<span style==Installation Video==PiKVM"color:red;">Please use the supplied USB Type-A3 Kit: https://youtuC to USB 2.be/KrpHCsK7veA (Note: the X6300 A-A3 V1Male Cable only.2 has been updated USB-C to X630USB-V1.3 A cable only with DATA lines(for keyboard and mouse emulation) and remove one on-board spacer no power supply, Using other cable might cause instability or damage to simplify either the installationhost PC or the Pi.)
[[File:Pi4PiKVM-V3A3A4-HATConnection.pngjpg|800px700px|PIKVM V3HAT-A3 PiKVM-A4]]
Click it to zoom in
===OS Download & Installation===
1. Firstly, need prepair a micro sd card, a minimum 16 Gb class 10 memory card is recommended.
:For Raspberry Pi 4, please use [https://files.pikvm.org/images/v3-hdmi-rpi4-box-latest.img.xz PiKVM V3 platform]. <span style="color:red;">Only compatible with '''PiKVM V3 Platform OS''', NOT support '''V4'''</span>
===Enable RTC ===
<span style="color:red;">Only need to configure the RTC function for the X630-A3 V1.5/V1.3/V1.2 version, X630-A3 V1.6 don't need.</span>
Due to different RTC chips with official PiKVM hardware, you still need to '''Q: How to login?configure RTC'''to make RTC work normally.
1. switch to 'root' user
su root
then type the password, and the default password is 'root' also.
2. Switch OS to writable mode rw3. Edit the /boot/config.txt file, and change line <code>dtoverlay=i2c-rtc,pcf8563</code> to <code>dtoverlay=i2c-rtc,ds1307</code> (due to use the different RTC chip). sudo nano /boot/config.txtThen save & '''Q: How to switch root user?reboot'''the device;
5. Swith OS to readonly mode
ro
rw
systemctl enable --now kvmd-oled
ro
If you are using <code>PiKVM OS V3 Pre-Assembled</code>, the OLED configuration is already pre-installed, you can ignore this step.
===Enable hdmi audio===
Refer to [[Enable pikvm hdmi audio]]
<details>
<summary>Q. How to switch to root user?</summary>
<p>A: run the following command:</p>
<pre>su root</pre>
<p>Then type the password, the default password is 'root' also.</p>
</details>
<details>'''<summary>Q: . How to enable RTCOLED display?'''</summary><p>A: Firstly, insert the C1220 button battery.run Run the following commandto enable OLED display: rw sudo nano /boot</config.txt #Then change the line: '''dtoverlay=i2c-rtc,pcf8563''' to '''dtoverlay=i2c-rtc,ds1307'''p>
==References==
<references />
<!--Add review function! -->