* The X1011 is designed specifically for data storage purposes and <span style="color:red;">does not currently support NVMe boot</span> with the existing firmware.
* <span style="color:red;">Don't</span> power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time.
* <span style="color:red;">Not</span> compatible with M.2 <span style="color:red;">SATA</span> SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
* Older NVMe drives with less efficient flash media may not perform as well as newer drives
* New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
==Overview==
* Features an integrated high-performance PCIe packet switch
* Equipped with high-efficiency DC/DC step-down converter, delivering a maximum of 10A to power your SSDs
* '''Powering via both pogo pins & FFC or DC power jack, ensuring sufficient power supply without any worries '''
* Designed to be attached on bottom, allows using your favorite HATs alongside it
* Compatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down.
* Compatible with the official active cooler without affecting cooling performance
* PCB Size: 109mm x 87.2mm
==How to Power==
* <span style="color:red;">5Vdc +/-5% ≥5A</span> power via FFC & pogo pins
* <span style="color:red;">5Vdc +/-5% ≥5A</span> power via DC power jack
<span style="color:red;">Don't power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time.</span>
==Ports & Connectors==
* DC power jack: 5.5x2.1mm, polarity: center positive (+)