5,195
edits
Changes
Jump to navigation
Jump to search
<!--
Refer to waveshare wiki, DON'T remove the comment
https://www.waveshare.com/wiki/1.3inch_LCD_HAT
-->
'''Auto-start when Power on'''Configure the script to run automatically at startup
Q100
,{{GD Template Impl}}
[[File:Q100-IMG-7622-1.jpg|thumb|right|installation guide]]
[[File:Q100-IMG-7641.jpg|thumb|right|]]
[[File:Q100-IMG-7644.jpg|thumb|right|]]
[[File:Q100-XIMG-6870-Packing-List.jpg|thumb|right|Q100 packing list]]
==Overview==
The Q100 is an expansion board similar to [[X1000]]. It has the function of PCIE to NVME ssd and also has an attached a 1.3" 240x240 Color TFT(ST7789 chipset), The TFT can display system and SSD status information, making it ideal for use as an additional display for NAS or media systems.
{{PCIe to NVME Sets}}
==Features==
* NVMe Base PCB with M.2 Slot (M-Key NVMe SSD with 2242 sizes)
* With ACT LED Indicator(Flashing: Reading /Writing)
* With 40pin GPIO Header，it can supply power from GPIO,avoiding the problem of insuggicient power supply for ultra-large capactiy SSDs
* 1.3" 240x240 Color TFT (ST7789 chipset),The TFT can display system and SSD status information, making it ideal for use as an additional display for NAS or media systems.
* 'PCIe Pipe' Flat Flex Shielded Cable(50mm length FFC Shielded Cable),shielded cables can provide better PCIE performance, effectively solve the interference problem between PCIE and WIFI, and provide a more stable data link for SSDs.
==PIN OUT==
This LCD use a 4-line SPI interface for reducing GPIO and fast speed.LCD
==LCD Working Protocol==
[[File:Q100-lcd-work-protocol.png]]
==User Manual==
Only provides tutorials for running on Raspberry Pi OS as following
==NVMe SSD boot tutorial==
Reter to [[NVMe SSD boot with the Raspberry Pi 5]]
'''3. Run the demo'''
<pre>
sudo python status.py
</pre>
The results are as follows：
[[File:Q100-lcd-on-2.jpg|800px]]
'''4. Auto-start when Power on'''
sudo nano /etc/rc.local
[[File:Q100-auto-run-script.png]]
'''5. References:'''
* https://www.waveshare.com/wiki/1.3inch_LCD_HAT
<!--Add review function! -->