5,257
edits
Changes
Jump to navigation
Jump to search
no edit summary
: <span class="tb_red">PS: USB connector must be insert</span>
'''2. <u>Disconnect power supply</u>, and choose your Raid setting, insert or remove jumper by the following jumper instruction:'''
* For '''RAID0''' setting, Both '''A''' and '''B''' jumpers need to be shorted
* For '''RAID1''' setting, Only the '''B''' jumper needs to be shorted
</pre>
There are two HDDs/SSDs devices were found. (/dev/sda and /dev/sdb) to '''PM ''' model;
Or
<pre>
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
/dev/sda 8:0 0 298.1G 0 disk
└─/dev/sda 8:1 0 298.1G 0 part
/dev/mmcblk0 179:0 0 7.4G 0 disk
├─/dev/mmcblk0p1 179:1 0 256M 0 part /boot
└─/dev/mmcblk0p2 179:2 0 7.1G 0 part /
</pre>
There is '''ONLY one''' HDD/SSD devices is found. (/dev/sda) to '''RAID1''' or '''RAID0''' model;
'''[NOTE]'''：