Difference between revisions of "H500"
Jump to navigation
Jump to search
Line 6: | Line 6: | ||
The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads. | The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads. | ||
+ | |||
+ | <pre> | ||
+ | WARNINGS | ||
+ | • This product should only be used with Raspberry Pi 5. | ||
+ | • This product should only be operated in a well ventilated environment, and if used with a case, the case should not | ||
+ | be covered. | ||
+ | • Make sure the metal heatsink does not touch any electronic components on Raspberry Pi 5 or any accessories, to | ||
+ | avoid the risk of unwanted electrical contact and shorting. | ||
+ | • Ensure the thermal pads are present and undamaged before use. If the pads are missing or damaged, you will need | ||
+ | to replace them before using the Active Cooler. | ||
+ | • Take care when using the Active Cooler, as the metal parts of the product may become hot during operation. | ||
+ | • Avoid removing the Active Cooler once it is fitted to Raspberry Pi 5, as this product is not designed for repeated | ||
+ | removal and replacement. | ||
+ | </pre> | ||
==Features== | ==Features== |
Revision as of 16:50, 24 November 2023
Contents
Overview
This is the Raspberry Pi Official Active Cooler for Raspberry Pi 5.
The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
WARNINGS • This product should only be used with Raspberry Pi 5. • This product should only be operated in a well ventilated environment, and if used with a case, the case should not be covered. • Make sure the metal heatsink does not touch any electronic components on Raspberry Pi 5 or any accessories, to avoid the risk of unwanted electrical contact and shorting. • Ensure the thermal pads are present and undamaged before use. If the pads are missing or damaged, you will need to replace them before using the Active Cooler. • Take care when using the Active Cooler, as the metal parts of the product may become hot during operation. • Avoid removing the Active Cooler once it is fitted to Raspberry Pi 5, as this product is not designed for repeated removal and replacement.
Features
- Single-piece anodised aluminium heatsink
- Heatsink-mounted, temperature-controlled blower fan attached by three screws
- Spring-loaded push pins for mounting onto Raspberry Pi 5
- Pre-applied thermal pads for heat transfer
Specifications
- Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5
- Fan speed control: Pulse width modulation control with tachometer
- Maximum airflow: 1.09 CFM
- Maximum fan speed: 8000 RPM +/- 15%
- Product material: Anodised aluminium
Enable comment auto-refresher