5,305
edits
Changes
Jump to navigation
Jump to search
4. But due to different RTC chips with official PiKVM, you still need to '''configure RTC''' to make RTC work normally, please refer to the following '''FAQ#Q: How to enable RTC'''
===Enable OLED display===
Run the following command in web terminal window:
rw
systemctl enable --now kvmd-oled
ro
It is important Due to note that we used a different RTC IC than the chips with official PiKVM hardware, you still need to '''configure RTC''' to make RTC work normally.
Firstly, insert the ```C1220``` button battery. run the following command in web terminal window:
3. Flash it to a microSD memory card by following [https://docs.pikvm.org/flashing_os the simple instructions] or [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system Official installation tutorial]
===Enable RTC ===
<pre>
rw
ro
</pre>
===Enable OLED display===
Run the following command in web terminal window:
rw
systemctl enable --now kvmd-oled
ro
==FAQ==
* First of all, we recommend you to get more FAQ information on the official website: [https://docs.pikvm.org/faq/ official FAQ], or check the following FAQ;