Changes

NASPi Gemini 2.5

147 bytes removed, 16:06, 24 July 2023

</syntaxhighlight>

You can found two hard drives <code>/dev/sda</code> and <code>/dev/sdb</code> if you select 'clear raid mode'(this is PM mode)

or

You found only one hard drive <code>/dev/sda</code> if you select the RAID0/RAID1 mode

~~4. Set CLEAR RAID mode (PM, factory default setup)~~

* Press the SET button for about 5 seconds then and release it till blue LED indicators starts flashing.

* After above processes, the setup for CLEAR RAID is done.

'''[NOTE]'''：

5,208

edits