<big>Although this installation tutorial is still available, but we strongly recommend that you use [[X729-script]] new tutorial, and we no longer maintain this page.</big>
==Setup script==
The following test is base on * [https://downloads.raspberrypi.org/raspios_arm64/images/raspios_arm64-2023-05-03/2023-05-03-raspios-bullseye-arm64.img.xz 2023-05-03-raspios-bullseye-arm64.img.xz]* [https://www.raspberrypi.com/software/operating-systems/ 2022-09-22-raspios-bullseye-armhf.img.xz]* [https://www.raspberrypi.com/software/operating-systems/ 2022-09-22-raspios-buster-armhf.img.xz] PS: To buster version, the default user name is 'pi, but bullseye version, you need to manually create a new user. In our example script, the new user name we created is 'pi'. If you create your own user name, you need to modify the corresponding user name directory in the script. For Example: You may need to change '/home/pi/' => '/home/XX/', 'XX' is user name you created.
#36 - the address of the battery fuel gauging chip
#3c - address of oled display,This value only exists when the oled is inserted,check if the OLED displayis inserted in the correct direction if you don't found the above i2c port
#40 - TI INA219 12-bit current/voltage/power monitor
#68 - the address of the RTC chip
3.2. Install script&reboot:
cd x729
chmod +x *.sh
sudo bash pwr.sh
#Setting up the command to turn off X729 from software
#Setting up the command to turn off X729 from software