5,195
edits
Changes
First, we recommend that you read [https://www.raspberrypi.org/app/uploads/2013/07/RaspiCam-Documentation.pdf Raspberry Pi camera applications document]
'''For Hardware Reset''' - Starting RASPISTILL or RASPIVID once then reboot your Raspberry Pi.
==Use GStreamer Tools ==
You need an accessory board ([[X630#X630-A2]]) for audio capturing.
Please refer to [[CSI-2-Software]] if you are use the '''Raspberry Pi Bullseye OS'''
==Use RASPISTILL RASPIVID ==
Only for user want to use old RASPISTILL RASPIVID command.OS before Rasberry Pi Bullseye OS such as '''Raspberry Pi Buster OS'''
1. Update & upgrade the raspberry pi system (It will take a long time depend on the different country)
Navigate to ''''Interfacing Options'''' and hit Enter. Now select the ''''Camera'''' option, and hit the Enter key to enable it. Select “Finish” and select to '''reboot''' your Raspberry Pi.
3. Edit /boot/config.txt to add the line (that will need sudo, and use your preferred editor'sudo nano /boot/config.txt')
dtoverlay=tc358743
to the end of the file.
Here, "image" is the name of your image that will be saved to your Raspberry Pi
sudo reboot
raspivid -o video.h264 -t 10000
Here, "video" is the name of your video and "10000" is the number of milliseconds.
sudo reboot
<comments />