6,082
edits
Changes
Jump to navigation
Jump to search
no edit summary
* Boot up the Pi and log in. The default username is pi, and the default password is raspberry. (Note: if you have changed these from the default then you will need to supply your own user/password details).
* Run the following commands in a terminal to upgrade the Raspberry Pi firmware to the latest version:
''sudo apt-get update''
[[File:Fisheye1.png]]
''sudo apt-get upgrade''
[[File:Fisheye1.png]]
* Access the configuration settings for the Pi by running the following command:
''sudo raspi-config''
* Navigate to “camera” and select “enable”.
[[File:Fisheye3.png]]
[[File:Fisheye4.png]]
* Select “Finish” and reboot.
[[File:Fisheye5.png]]
* Run the following commands in a terminal to upgrade the Raspberry Pi firmware to the latest version:
''sudo apt-get update''
[[File:Fisheye1.png]]
''sudo apt-get upgrade''
[[File:Fisheye1.png]]
* Access the configuration settings for the Pi by running the following command:
''sudo raspi-config''
* Navigate to “camera” and select “enable”.
[[File:Fisheye3.png]]
[[File:Fisheye4.png]]
* Select “Finish” and reboot.
[[File:Fisheye5.png]]