Difference between revisions of "T201"
Jump to navigation
Jump to search
Line 5: | Line 5: | ||
==Features== | ==Features== | ||
+ | * Ideal Uninterruptible Power Supply (UPS) solution for Jetson Nano Developer Kit | ||
+ | * Max 5.1V 4000mA Power Backup for Jetson Nano | ||
+ | * With 18650 single cell battery holder | ||
+ | * Upto 1000mA charging current | ||
+ | * AC power loss & power adapter failure detection (LED & GPIO) | ||
+ | * Automatic powering off after system safe shutdown | ||
+ | * Integrated battery reverse polarity protection circuit | ||
+ | * Integrated over current protection and over voltage protection | ||
+ | * Intelligent automatic charging and discharging | ||
+ | * 4 blue LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% | ||
+ | * Powers the Jetson Nano via the 40-pin header - no additional cabling required | ||
+ | * Reserves the 40-pin header that can be stacked with other accessory boards | ||
+ | * On-board press button to control power on /off | ||
+ | * Press the button to power on | ||
+ | * Press the button for 3 seconds to power off | ||
==Packing List== | ==Packing List== |
Revision as of 15:55, 17 June 2022
Contents
Overview
T201 is a compact one-cell 18650 UPS Shield specially designed for NVIDIA Jetson Nano Developer Kit, it provides smart and powerful uninterruptible power supply and safe power management for Jetson Nano 2GB/4GB.
Features
- Ideal Uninterruptible Power Supply (UPS) solution for Jetson Nano Developer Kit
- Max 5.1V 4000mA Power Backup for Jetson Nano
- With 18650 single cell battery holder
- Upto 1000mA charging current
- AC power loss & power adapter failure detection (LED & GPIO)
- Automatic powering off after system safe shutdown
- Integrated battery reverse polarity protection circuit
- Integrated over current protection and over voltage protection
- Intelligent automatic charging and discharging
- 4 blue LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
- Powers the Jetson Nano via the 40-pin header - no additional cabling required
- Reserves the 40-pin header that can be stacked with other accessory boards
- On-board press button to control power on /off
- Press the button to power on
- Press the button for 3 seconds to power off
Enable comment auto-refresher
Anonymous user #2
Permalink |
Walker
Anonymous user #1
Permalink |
Walker
Anonymous user #1
Permalink |
Anonymous user #1
Permalink |
Walker