2,903
edits
Changes
Jump to navigation
Jump to search
* Support OTG interface (via Micro USB Port for data)
* Support CM3+, CM3 (build in 4GB NAND Flash), support CM3L (TF card slot has a place to use)
* PCB Size: 85mmx56mm, the max height of the board is about 11.5mm.
==Indicator light==
dtoverlay=mmc
#starup raspberry pi, and enter the console;
# wget http://www.raspberrypiwiki.com/download/cm3-io-board/dt-blob-csi-dsi.bin git clone https://github.com/geekworm-com/cm-io-board.git cd cm-io-board
sudo mv dt-blob-csi-dsi.bin /boot/dt-blob.bin