2,288
edits
Changes
* Designed to be attached on '''bottom''', allows using your favorite HATs alongside it
* Powering via both pogo pins and FFC, ensuring sufficient power supply without any worries
|-
| '''Technical Specification''' ||
* Older NVMe drives with less efficient flash media may not perform as well as newer drives
* New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
* Since X1005 is using [https://www.asmedia.com.tw/product/213yQcasx8gNAzS4/b7FyQBCxz2URbzg0 ASMedia ASM1182e] PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
|}