X1203

Safety Instructions & Warnings

• The charging current is set to 2.3-3.2A and charge cut-off voltage is 4.23V. Before connecting your battery to the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.
• It is essential to read and understand these safety instructions and warnings before charging your batteries.
• Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury, and damage to property if charged or used improperly.
• Never make a wrong polarity connection when charging or discharging battery packs. Always double-check the polarity of the battery's connector to ensure that "+" is connected to "+" and "-" is connected to "-".
• Do not mix and use old batteries with new batteries, or batteries with different brand names.
• Lithium batteries have a limited cycle life. Please replace old batteries with new ones when they reach their service life or when they are two years old, whichever comes first.
• When charging the Battery Pack, please place the battery in a fireproof container. Do not leave the UPS shield on wood material or carpet unattended.
• Keep the UPS shield away from children to ensure their safety.
• Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/
• Battery Recommend for Geekworm UPS board, please refer to: File:NCR18650B.pdf

Overview

X1203 is an innovative uninterruptible power supply (UPS) expansion board designed specifically for the Raspberry Pi 5B. With its advanced features and robust power backup capabilities, the X1203 is perfect for even the most demanding Raspberry Pi setups.

Model	Compatible with	Position	Battery Holder NO.	How to Power	Note
X1200	Raspberry Pi 5	Bottom	2-Cell	5Vdc 5A via USB Type-C of X1200	/
X1201	Raspberry Pi 5	Bottom	2-Cell	5Vdc 5A via USB Type-C of X1201	Ultra-thin
X1202	Raspberry Pi 5	Bottom	4-Cell	5Vdc 5A via USB Type-C of X1202; OR 6-18Vdc, ≥3A via DC 5521 power jack of X1202	/
X1203	Raspberry Pi 5	Bottom	without battery holder	6-18Vdc via DC5521 power jack of X1203	/

Reliable Power Backup: The X1203 provides a stable 5.1V 5000mA power backup, ensuring uninterrupted operation of your Raspberry Pi. Whether you are running resource-intensive applications or powering multiple peripherals, the X1203 delivers reliable and consistent power supply.

Enhanced Power Management: One of the standout features of the X1203 is its enhanced power management system. It intelligently monitors the power status of the Raspberry Pi and automatically cuts off power when the Pi is shut down. This helps optimize battery life by entering an ultra-low standby power consumption mode. It ensures efficient operation and maximizes the lifespan of the UPS battery.

Seamless Power Switching: Equipped with AC power loss and power adapter failure detection, the X1203 seamlessly switches to backup power in the event of a power outage or power adapter failure. This feature guarantees that your Raspberry Pi remains operational and protected from unexpected power disruptions.

Convenient Features: The X1203 offers convenient features such as auto power-on, enabling your Raspberry Pi to automatically boot up when power is restored. It also supports full power-off from software, allowing you to safely shut down your Raspberry Pi without manual intervention.

Fast Charging: With fast charging capabilities of up to 3000mA, the X1203 ensures quick recharging of the UPS, making it ready to provide backup power whenever needed.

Versatile Design: The X1203 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs.

Seamless Data Backup: The X1203 is compatible with our range of storage products, providing seamless integration for safe and reliable data backup. Your valuable data remains protected, even in the event of a power failure.

Enhance the reliability and performance of your Raspberry Pi 5B with the X1203 UPS expansion board. Experience peace of mind with its advanced features and robust power backup capabilities. Trust the X1203 to ensure uninterrupted operation and safeguard your valuable data.

Features

For use with	Raspberry Pi 5 Model B
Key Features	UPS Output Provides continuous operation for up to 10 hours (duration depends on battery type and applications) Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss Convenient pogo pin connection for powering the Pi, eliminating the need for cabling and soldering Equipped with XH2.54 connectors for 5V power output Battery Charging Supports fast battery charging with a capacity of 3000mA Battery charging control can be managed via GPIO Provides protection against battery overcurrent and overvoltage Built-in protection against reverse connection of battery cells Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100% Features two XH2.54 battery connectors Power Input Integrated high-efficiency step-down DC-DC converter Wide operating input range of 6V to 18V Up to 95% efficiency for optimal power conversion Provides up to 5.5A output current, enabling 3A fast charging while powering the system Allows power input from various sources such as a car, solder panel, and more Common power input jack size of 5.5x2.1mm Compatible with Raspberry Pi USB-C Power Supply Enhanced Power Management Seamless power switching between backup power and power adapter On-board push button performs the same actions as the Pi's power button Automatically cuts off power when the Pi is shut down On-board LED indicates power status and Pi detection AC power loss and power adapter failure detection via GPIO Auto power-on when power is applied or restored Automatic safe shutdown when battery voltage is low (programmable) Ultra-low standby power consumption to maximize battery life Advanced system power-path management to minimize frequent charging and discharging of batteries Miscellaneous Connects to the Pi via convenient pogo pins, eliminating the need for additional cabling Designed to be attached on the bottom, allowing the use of favorite HATs alongside it XH2.54 connector available for adding your own power button
Spec	Power input: 6-18Vdc via DC5521 power jack of X1203 (12Vdc 3A power adapter recommended), OR 5Vdc ±5%, ≥5A via USB-C socket of X1203 UPS output: 5.1V ±5% Max 5A Battery charging current: 2.3-3.2A --IMPORTANT !!-- Please confirm before connecting your battery. Terminal Battery Voltage: 4.23V --IMPORTANT !!-- Please confirm before connecting your battery. Battery Recharge Threshold: 4.1V Ports & Connectors: DC power jack - 5.5x2.1mm XH2.54 battery connector x2 5V Power output connector x2 - XH2.54 2-pin External power button connector x1 - XH2.54-2P PCB Size: 85mm x 68mm
Important Notes:	Do not apply power to your Raspberry Pi via the Type-C USB socket. Do not use 18650 battery with built-in protection circuit.

Packing List

• X1203 V1.0 UPS shield x 1
• Screw pack x 1

User Manual

Hardware Installation

X1203 Hardware

Software Installation

X1203 Software

FAQ

Q1: Question 1

A: Place the answer here.

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

9 days ago

Score 0

What flat li-po battery would you recommend (Except 18650)? Does the max li-po have to 3000mah? Is a 3000mah 3.7v lipo good enough?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Lisa

9 days ago

Score 0

There is no limit on the battery capacity, it depends on the voltage, the required voltage is 3.7V

Permalink