2,280
edits
Changes
==Features==
{| class="wikitable"
|-
| '''For use with''' ||
Raspberry Pi 5 Model B
|-
| '''Key Features''' ||
'''UPS Output'''
* Provides continuous operation for up to 10 hours (duration depends on battery type and applications)
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Convenient pogo pin connection for powering the Pi, eliminating the need for cabling and soldering
* Equipped with XH2.54 connectors for 5V power output
'''Battery Charging'''
* Supports fast battery charging with a capacity of 3000mA
* Battery charging control can be managed via GPIO
* Provides protection against battery overcurrent and overvoltage
* Built-in protection against reverse connection of battery cells
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features two XH2.54 battery connectors
'''Power Input'''
* Integrated high-efficiency step-down DC-DC converter
* Wide operating input range of 6V to 18V
* Up to 95% efficiency for optimal power conversion
* Provides up to 5.5A output current, enabling 3A fast charging while powering the system
* Allows power input from various sources such as a car, solder panel, and more
* Common power input jack size of 5.5x2.1mm
* Compatible with Raspberry Pi USB-C Power Supply
'''Enhanced Power Management'''
* Seamless power switching between backup power and power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi is shut down
* On-board LED indicates power status and Pi detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
* Automatic safe shutdown when battery voltage is low (programmable)
* Ultra-low standby power consumption to maximize battery life
* Advanced system power-path management to minimize frequent charging and discharging of batteries
'''Miscellaneous'''
* Connects to the Pi via convenient pogo pins, eliminating the need for additional cabling
* Designed to be attached on the bottom, allowing the use of favorite HATs alongside it
* XH2.54 connector available for adding your own power button
|-
| '''Spec''' ||
<span class="tb_red">'''Power input:''' 6-18Vdc via DC5521 power jack of X1203,</span>(12Vdc 3A power adapter recommended)
'''UPS output:''' 5.1V ±5% Max 5A
'''Battery charging current:''' 2.3-3.2A <span class="tb_red">--IMPORTANT !!-- Please confirm before connecting your battery.</span>
'''Terminal Battery Voltage:''' 4.23V <span class="tb_red">--IMPORTANT !!-- Please confirm before connecting your battery.</span>
'''Battery Recharge Threshold:''' 4.1V
'''Ports & Connectors:'''
* DC power jack - 5.5x2.1mm
* XH2.54 battery connector x2
* 5V Power output connector x2 - XH2.54 2-pin
* External power button connector x1 - XH2.54-2P
'''PCB Size:''' 85mm x 68mm
|}
==Packing List==