2,288
edits
Changes
Jump to navigation
Jump to search
[[File:X1004-v1.1-MG-6870-Packing-List.jpg|thumb|right|X1004 V1.1 Dual Nvme shield]]
[[File:X1004-v1.1-1300p5.jpg|thumb|right|X1004 V1.1 Dual Nvme shield]]
[[File:X1004-v1.1-1300p6.jpg|thumb|right|X1004 V1.1 Dual Nvme shield]]
==Overview==
|}
== Important Notes==
* Compatible with M.2 NVMe SSDs only
* Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
* Older NVMe drives with less efficient flash media may not perform as well as newer drives
* New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
==Matching Case==
Please refer to [[P579|P579-V2]]
==Packing List==
* 1 x X1004 Shield
* 4x M2.5x17mm F/F Spacers* 9x M2.5x5mm Screws* 1x Riser Board* 2x 30mm length FFC cable(one as backup)[[File:X1004-v1.1 x Screw pack-MG-6870-Packing-List.jpg |500px]]
==User Manual==
* X1004 software tutorials: [https://suptronics.com/Raspberrypi/Storage/x1004-v1.1_software.html X1004 software]
* [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf Raspberry pi 5 pcie connector pin out]
==Assembly Instructions==
[[File:X1004-P579-V2-Installation.jpg|600px]]
<!--Add review function! -->