5,251
edits
Changes
no edit summary
We hope the Raspberry Pi Foundation will resolve this issue soon.
-->
<span class="tb_red">Also note:</span>
* Compatible with M.2 '''NVMe''' SSDs only, '''Not''' compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
* New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
* We get feedback from customers that '''Polaris Controller''' will also have compatibility problems. Please replace the other SSD test if it not work, whether it is compatible with the Raspberry Pi 5 does not depend on the X100X series boards
* NVMEs using the '''MAP1202''' controller may not support PCIe Gen 2, and must be forced to enable PCIe Gen 3 in order to be recognised. This is due to the fact that the controller is not backward compatible with PCIe 2.0, and NVMEs using this controller will have compatibility issues, and are not recommended for use. Can refer to https://zhuanlan.zhihu.com/p/644984347
<!-- from: https://shop.pimoroni.com/products/nvme-base?variant=41219587178579 -->
'''<span class="tb_red_bold">PS: There is also feedback from buyers that even NVME SSDs with ''Phison controller'' are supported after updating the latest firmware. Please refer to go to: [[X1001#comment-4638]]</span>'''