View source for X3000K

{{GD Template Impl}}
[[File:IMG_1876.jpg|thumb|right|400px|X3000 Mini PC Kits]]
[[File:IMG_1875.jpg|thumb|right|400px|X3000 Mini PC Kits]]
[[File:IMG_1877.jpg|thumb|right|400px|X3000 Mini PC Kits]]
[[File:IMG_1879.jpg|thumb|right|400px|X3000 Mini PC Kits]]
[[File:IMG_1881.jpg|thumb|right|400px|X3000 Mini PC Kits]]
[[File:IMG_1869.jpg|thumb|right|400px|X3000 Mini PC Kits]]

== Introduction ==
<font color="#FF0000">Basic Information</font>

Material: Mirageblack tope panel, magnesium aluminum alloy body

[[File:X3000_860p4.jpg]]

== Features ==

[[File:无标题.png]]

== How to use ==
<font color="#007FFF">'''A. FITTING THE RASPBERRY PI'''</font>

[[File:X3000_860p5.jpg]]

[[File:X3000_860p11.jpg]]

[[File:X3000_860p6.jpg]]

[[File:X3000_860p7.jpg]]

[[File:X3000_860p8.jpg]]

<font color="#FF0000">'''MSATA SSD SHOULD BE INSTALLED BEFORE FITTING THE RASPBERRY PI.'''</font>

Step 1: Connect the power & IR cable from Raspberry Pi to the 2-pin male pin header

Sept 2: Plugs the HDMI daughter board into the 14-pin HDMI female pin header

Step 3: Connect the cable of USB daughter board to the 3-pin PH connector

Step 4: Screwing the Raspberry Pi board

[[File:X3000_860p9.jpg]]

<font color="#007FFF">'''B. POWER ON/ OFF'''</font>

<font color="#00FF00">TO TURN ON</font>

Touch the power symbol and hold until the colorful breathing light is ON.

<font color="#FF0000">TO SHUTDOWN</font>

1. Power off your system using the system menu - IMPORTANT!

2. Touch the power symbol and hold until the colorful breathing light is OFF.

3. It is recommended to unplug the power supply unit when you are not using it.

== Document ==
[[File:OPERATING_SYSTEM_CONFIGURATION_-_RASPBIAN_JESSIE.docx]]

http://www.suptronics.com/miniPCkits/x3000_instructions.html

== Packing List ==
* 1 x Mini PC Kits
* 1 x Power Adapter(cable length: about 118cm)
* 1 x Screw Kits
* 1 x Mini HDMI Cable (cable length: about 145cm)
* 1 x Micro USB Cable(cable length: about 93cm)
* 1 x HDMI daughter board
* 1 x USB daughter board
* 1 x Vesa