View source for How to install the image to your pi

== Format the micro sd card ==
Format tools: [[File:SDFormatterV4.zip]];

Download this tool, and format your SD card firstly!

== Write firmware to micro sd card ==
* Insert the SD card into your SD card reader and check which drive letter was assigned. 
* You can easily see the drive letter (for example G:) by looking in the left column of Windows Explorer.
* You can use the SD Card slot (if you have one) or a cheap SD adaptor in a USB port.
* Download the [[File:Usbit162.zip]] or [[File:Win32DiskImager.zip]] utility from the here(it is also a zip file); you can run this from a USB drive.
* Extract the executable from the zip file and run the Win32DiskImager utility; you may need to run the utility as administrator. Right-click on the file, and select run as administrator.
* Click write and wait for the write to complete.
* Exit the burn tools and eject the SD card.

=== FAQ ===
* Select the drive letter of the SD card in the device box. Be careful to select the correct drive;
* if you get the wrong one you can destroy your data on the computer's hard disk! 
* If you are using an SD card slot in your computer and can't see the drive in the Win32DiskImager window, try using a cheap SD adaptor in a USB port.
<comments/>