View source for How to View/Partition/Format/Mount HDD/SSD

{{GD Template Impl}}

==How to view the HDD/SSD==
1. Check USB device:
 lsusb
The result is as follows
‎<pre>
Bus 002 Device 004: ID 152d:0561 JMicron Technology Corp. / JMicron USA Technology Corp. JMS551 - Sharkoon SATA QuickPort Duo
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
</pre>

The first line indicates that the USB device has been correctly recognized by the OS. ('''JMicron''' is the USB storage chip supplier)


If you cannot find the corresponding USB device, please check that your USB device is tightly connected, or replug the USB3 connector, or replace the USB3 connector with a USB-A to USB-A cable.

Sometimes, '''insufficient power supply''' may also cause the USB device not to be found, so we can also try to replace a high-quality power adapter.

If you have tried these actions and still cannot solve the problem, please contact us （'''support@geekworm.com'''） with the result information after running the '''lsusb''' command and your order number.


2. View HDD/SSD
 lsblk -p
The result is as follows
<pre>
NAME             MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
/dev/sda           8:0    0 298.1G  0 disk 
└─/dev/sda1        8:1    0 298.1G  0 part 
/dev/sdb           8:16   0  74.5G  0 disk 
└─/dev/sdb1        8:17   0  74.5G  0 part 
/dev/mmcblk0     179:0    0   7.4G  0 disk 
├─/dev/mmcblk0p1 179:1    0   256M  0 part /boot
└─/dev/mmcblk0p2 179:2    0   7.1G  0 part /
</pre>

There are two SSDs devices were found. (/dev/sda and /dev/sdb)


3. Check if the hard disk is partitioned.
 pi@raspberrypi:~ $ sudo fdisk /dev/sda
 
 Welcome to fdisk (util-linux 2.36.1).
 Changes will remain in memory only, until you decide to write them.
 Be careful before using the write command.
 
 
 Command (m for help): p
 Disk /dev/sda: 74.53 GiB, 80026361856 bytes, 156301488 sectors
 Disk model: Tech            
 Units: sectors of 1 * 512 = 512 bytes
 Sector size (logical/physical): 512 bytes / 512 bytes
 I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
 Disklabel type: dos
 Disk identifier: 0x65b1c901
 
 Device     Boot Start       End   Sectors  Size Id Type
 /dev/sda1       65535 156301487 156235953 74.5G 83 Linux
 
 Partition 1 does not start on physical sector boundary.
 
 Command (m for help): 

The above result tells us that SDA already has a partition: /dev/sda1

 pi@raspberrypi:~ $ sudo fdisk /dev/sda
 
 Welcome to fdisk (util-linux 2.36.1).
 Changes will remain in memory only, until you decide to write them.
 Be careful before using the write command.
 
 
 Command (m for help): p
 Disk /dev/sda: 74.53 GiB, 80026361856 bytes, 156301488 sectors
 Disk model: Tech            
 Units: sectors of 1 * 512 = 512 bytes
 Sector size (logical/physical): 512 bytes / 512 bytes
 I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
 Disklabel type: dos
 Disk identifier: 0x65b1c901
 
 Command (m for help): 
The above result tells us that SDA has no partitions

'''If the hard disk is not partitioned, we need to [[How to Partition a HDD | partition the hard disk]]'''

==How to Partition a HDD==
 pi@raspberrypi:~ $ sudo fdisk /dev/sda
 
 Welcome to fdisk (util-linux 2.36.1).
 Changes will remain in memory only, until you decide to write them.
 Be careful before using the write command.
 
 
 Command (m for help): p
 Disk /dev/sda: 74.53 GiB, 80026361856 bytes, 156301488 sectors
 Disk model: Tech            
 Units: sectors of 1 * 512 = 512 bytes
 Sector size (logical/physical): 512 bytes / 512 bytes
 I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
 Disklabel type: dos
 Disk identifier: 0x65b1c901
 
 Command (m for help): n
 Partition type
    p   primary (0 primary, 0 extended, 4 free)
    e   extended (container for logical partitions)
 Select (default p): p
 Partition number (1-4, default 1): 1
 First sector (65535-156301487, default 65535): 
 Last sector, +/-sectors or +/-size{K,M,G,T,P} (65535-156301487, default 156301487): 
 
 Created a new partition 1 of type 'Linux' and of size 74.5 GiB.
 
 Command (m for help): p
 Disk /dev/sda: 74.53 GiB, 80026361856 bytes, 156301488 sectors
 Disk model: Tech            
 Units: sectors of 1 * 512 = 512 bytes
 Sector size (logical/physical): 512 bytes / 512 bytes
 I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
 Disklabel type: dos
 Disk identifier: 0x65b1c901
 
 Device     Boot Start       End   Sectors  Size Id Type
 /dev/sda1       65535 156301487 156235953 74.5G 83 Linux
 
 Partition 1 does not start on physical sector boundary.
 
 Command (m for help): w
 
 The partition table has been altered.
 Calling ioctl() to re-read partition table.
 Syncing disks.

Note: If you need to support partitions larger than 2TB, you need to use the '''parted''' command

==How to format HDD/SSD==
 pi@raspberrypi:~ $ sudo mkfs.ext4 /dev/sda1
 mke2fs 1.46.2 (28-Feb-2021)
 /dev/sda1 alignment is offset by 512 bytes.
 This may result in very poor performance, (re)-partitioning suggested.
 Creating filesystem with 19529494 4k blocks and 4882432 inodes
 Filesystem UUID: dc0c2c55-145e-440d-a648-c4909b13c021
 Superblock backups stored on blocks: 
 	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
 	4096000, 7962624, 11239424
 
 Allocating group tables: done                            
 Writing inode tables: done                            
 Creating journal (131072 blocks): 
 done
 Writing superblocks and filesystem accounting information: done


'/dev/sda1'/ is the first partition of the SDA . If you divide SDA into multiple partitions, there may be /dev/sda2, /dev/sda3, etc.

==How to mount HDD/SSD Partition==
 pi@raspberrypi:~ $ sudo mount /dev/sda1 /mnt
 pi@raspberrypi:~ $ df
 Filesystem     1K-blocks    Used Available Use% Mounted on
 /dev/root       30354572 8071072  20942064  28% /
 devtmpfs          793780       0    793780   0% /dev
 tmpfs             958644       0    958644   0% /dev/shm
 tmpfs             383460    1296    382164   1% /run
 tmpfs               5120       4      5116   1% /run/lock
 /dev/mmcblk0p1    258095   50413    207683  20% /boot
 tmpfs             191728      24    191704   1% /run/user/1000
 /dev/sda1       76314492      24  72392188   1% /mnt

'/dev/sda1' is mounted under '/mnt' folder





<!--Add review function! -->
<comments />

<!--Please choose the  -->
<!--Remove other categories, just keep the appropriate categories -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]
[[Category:Knowledge]]