View source for 7 inch HDMI TFT Capacitive Touch Screen 1024x600 SKU:408999

{{GD Template Impl}}
[[File:1.jpg|thumbnail|right|Raspberry Pi 7 inch HDMI TFT Capacitive Touch Screen 1024x600 sku:408999]]
[[File:2.jpg|thumbnail|right|Raspberry Pi 7 inch HDMI TFT Capacitive Touch Screen 1024x600 sku:408999]]

== Introduction ==
7 inch HDMI LCD (C)(1024 x 600)

7" HDMI IPS Capacitive Touch Screen for Raspberry Pi 3 Model B / 2B/  B+ / B , for beaglebone black and banana pro.

== Features ==
Features:
* 1024*600 (Pixel), IPS screeen; Full view;
* Compatible with Raspberry Pi 3 Model B/ 2B/ B+ (Provide full image or separate driver);
* For Raspberry Pi, you can run Raspbian and Ubuntu(only provide the image for Pi 3B/2B);
* Compatible with BeagleBone Black and Banana Pi/Pro;(Provide a full image)
* USB touch and HDMI display don't occupy any GPIO;
* Support win7/win8/win10, No driver;
* No driver if you use Raspbian system, only add the following line setting in config.txt;
 '''max_usb_current=1'''
 '''hdmi_group=2'''
 '''hdmi_mode=87'''
 '''hdmi_cvt 1024 600 60 6 0 0 0'''
 '''hdmi_drive=1'''

'''PS: we advise your copy the above comment.'''
* Power Consumption: When use 5V power, 490mA with backlight on. 90mA with backlight off

== How to rotate this LCD?==
modify the config.txt file according the following rules:
 display_rotate=0        #Normal
 #display_rotate=1        #90 degrees
 #display_rotate=2        #180 degrees
 #display_rotate=3        #270 degrees

==How is the screen powered?==
* This screen is powered via Raspberry Pi board USB interface. No extra separate power supply is required, working voltage is DC 5V;
* Turn off the backlight switch: 60ma @ 5V USB input
* Turn on the backlight switch: 260ma @ 5V USB input
* Maximum power consumption: 550ma @ 5V USB input, make sure to stabilize output 1A to ensure adequate supply current.

== User Guide (new)==
This method  is only suitable for Raspbian OS

Please use it as follow:
* Download the latest image on Raspberry Pi Official website: 
https://www.raspberrypi.org/downloads/
* Burn the image into TF card,  and open config.txt  file in your PC computer:
* Modify  the file config.txt; Append the following lines at the end of the file.

'''For 7 inch HDMI LCD (C)(1024 x 600):'''
 max_usb_current=1
 hdmi_group=2
 hdmi_mode=87
 hdmi_cvt 1024 600 60 6 0 0 0
 hdmi_drive=1
* Insert the Micro SD card into Raspberry Pi board, and power on to try it.

== User Guide (old)==
* Use the full firmware with driver for this LCD: [[Install the image to your raspberry pi]]
* Install driver to this LCD: [[Install driver to 7 inch Cap Lcd 1024*600|User manual]]
* New LCD version is out. Please refer to here to judge your LCD version. http://www.spotpear.com/learn/EN/raspberry-pi/Raspberry-Pi-LCD/Raspberry-Pi-7inch-Capacitive-HD-LCD-UserGuide-en.html

== Key Parameters ==
{| class="wikitable" border="1"
|-
! LCD Type
! HDMI TFT
|-
! LCD Interface
! USB
|-
!Touch Screen Type	
!Capacitive
|-
!Touch Screen Controller
!STM32-103
|-
!Colors
!65536
|-
!Backlight
!LED
|-
!Resolution
!1024*600 (Pixel)
|-
!Aspect Ratio
!4:3
|-
!SPI Diver Speed
!16Mhz
|-
!Backlight Current
!TBD
|-
!Operating Temp. (℃)
!TBD
|}	

==VGA screen resolution==
[[VGA screen resolution]]

== Packing List ==
*1 x Touch Screen
*1 x HDMI Cable (50cm)
*1 x USB Cable (80cm)

[[Category:Product Manual]]  
[[Category:Raspberry pi]]
<comments/>