View source for 433MHz Receive Module + Remote Controller

{{Deprecated}}
[[File:IMG_1675.jpg|thumbnail|right|300px]]
== Overview ==
SKU: 440014
433MHz Receive Module + Four button Controller Kit for WiFi Wireless Switch Module for Smart Home

== Features ==
* Receiver sensitivity: -110dBm;
* Operating frequency: 315MHz; 433.92MHz; 330MHz; 390MHz; 418MHz
* Power supply input range: 3.3V-5.5V;
* Low power cosumption 5.0V@ 433.92MHz, 3.8-4.1mA; 5.0V@ 315MHz, 2.5-2.8mA; Manchester Encoding could last the transmited speed to 2.4K.
* Pin Description: From left to right ANT, GND, LED, SW, VT, D0, D1, D2, D3, VDD, GND
* Working temperature range: -30-85 ℃
* Good local oscillator radiation suppression, receiver module could be worked in groups without any affect.
== Parameters ==
* Working voltage: 12V23A Battery
* Operating Current: ≤9mA
* Oscillation mode: SAW resonators
* The shock resistance: 4.7M, 3.3M, 330K
* Operating frequency: 315MHz, 433MHz
* Modulation: ASK
* frequency deviation: ± 150kHz (max)
* Encoding: welding code, learning code
* Chip Model: PT2262, PT2264 (fixed code); EV1527.PT2240 (learning code)
* The transmit power: 15mW
== Code method ==
Press and hold the key for 2 seconds short study, learn indicator light at this time that has entered the state of learning; learning key is released, the remote control A key indicator flashes 4 times indicates success in learning, and exit learning mode.
== Qing code method ==
Press and hold learning key indicator lit, hold about 8 seconds after the light is off, all the code has been successfully cleared.
== Applications ==
* car door remote control switch (RKE); 
* remote control door opener; 
* wireless security alarm; 
* Remote curtains; 
* wireless industrial controller; 
* wireless data transmission.
 [[Category: Product Manual]] [[Category:Smart Home]]

==Exapmles==
<gallery>
IMG_1670.jpg
IMG_1670-1.jpg|[[12V-1_Jog_Switch]]
IMG_1670-2.jpg|[[5V-1 Jog Switch]]
IMG_1670-3.jpg|[[5V-4 Jog Switch]]
IMG_1670-4.jpg|[[7V to 32V-4 Jog Switch]]
IMG_1671-1.jpg
IMG_1670-0.jpg


</gallery>