View source for X860

{{GD Template Impl}}
[[File:X860-IMG-5942.jpg|thumb|right|X860]]
[[File:X860-IMG-5926.jpg|thumb|right|X860]]
[[File:X860-IMG-5928.jpg|thumb|right|X860]]
[[File:X735-IMG-5921.jpg|thumb|right|X860 Metal Case]]
==Overview==
The new member of the Raspberry Pi storage expansion board family - X860 (<span style="color:red;">M.2 NGFF SATA 2280/2260/2242/2230</span> ) is coming.
2280/2260/2242/2230
==Features==
* Ideal storage solution for Raspberry Pi - <span style="color:red;">M.2 NGFF SATA SSD Shield</span>
* Supports up to 2TB m.2 NGFF SSD solid-state drive
* Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230
* Supports operating system installation and booting from your SSD
* Supports faster OS image writing (>300Mb/S*) from a PC or a Mac
* Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
* USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
* Quick file transfer with high-speed USB3.0 5Gb/s connectivity  from a PC or a Mac
* USB bus-powered
* LED blue indicator indicates drive status
* Specially-made <span style="color:red;">USB3.0 connector</span> to connect with Raspberry Pi - no additional cables needed
* On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts)
* Fully compatible with [[X720]], [[X730]] and [[X735]] for intelligent and safe power management
* PCB Size: 87mm x 56mm

<SPAN style="color:red;">[NOTE]</SPAN>
* USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
* NGFF SATA SSD is not included
* Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
* As with all SSDs, new media must be formatted before use
* Performance depends on host system, workload, and SSD media used
* SSDs use exceptionally high performance storage media that will run hot when under load
* Older SSD drives with less efficient flash media may not perform as well as newer drives
* We only test it on Raspberry pi, not test on the Rock64; But in fact, Rock64 can fully play the performance of USB3 since Rock64 with USB 3.0;

==Power supply request==
5Vdc +/-5% , Powered by Raspberry Pi

'''Additional power supply for SSD (<span style="color:red;">Only when you find that the power supply of the SSD is insufficient</span>)'''

5Vdc via on-board micro-USB or XH2.5 2Pin connector

<span style="color:red;">'''Note:'''</span>''' When use X860 board with X735 Safe Shutdown Power Management & Auto Cooling Expansion Board togehter, the power adapter must be connected to X735 power managment board only, not X860 or Raspberry Pi.

==Matching Metal Case==
Please refer to [[X850#X850_V4.0_metal_case]]

== Ports & Connectors ==
* USB socket - USB 3.0 type A x 1
* Micro-USB SSD power socket x 1 
* XH2.54 SSD power input port x 1
* 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1

==Packing List==
* 1 x X860 Board
* 1 x USB3.0 Connector
* 1 x USB 3.0 A-Male to A-Male Data cable
* 4 x Spacer F/F M2.5x8
* 4 x Spacer M/F2.5x12
* 4 x Screw M2.5x6
* 1 x Screwdriver

==Installation Guide==
[[File:X860安装说明.jpg|X860 installation guide]]

==Document==
How to boot from X860, you can refer to [http://www.suptronics.com/miniPCkits/x820-v3.0-software.html here] or [https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md How to boot from a USB mass storage device on a Raspberry Pi]

<!--增加评论功能！ -->
<comments />

<!--请选择合适的分类，多余的分类请删除； -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]