View source for X1509

{{GD Template Impl}}
==Overview==
1. This X1509 board supports 8 SATA ports, delivering a high-speed and high-capacity storage solution for Raspberry Pi CM5. It reaches a total storage capacity of up to 176TB (22TB per single drive).

2. Designed with a compact form factor, it is equipped with multiple ports and versatile peripherals for extensive expansion.

3. Built-in high-efficiency DC/DC step-down converters provide a stable 5V 12A output. A single power supply is sufficient to power both the CM5 module and all connected SATA storage devices.

Ideal for building home media centers, personal NAS systems and CCTV video storage servers.

==Features==
{| class="wikitable"
|- 
|'''Compatibility''' ||
:*'''Fully compatible with all variants of Raspberry Pi Compute Module 5 (CM5).'''
::RAM: 2GB, 4GB, 8GB, 16GB
::eMMC: 0GB (Lite), 16GB, 32GB, 64GB
::Wireless: both non‑wireless and wireless (Wi‑Fi/Bluetooth) models
:*'''Tested and supported operating systems: '''
::Raspberry Pi OS (64-bit)
::OpenMediaVault (OMV)
|-
| '''8 SATA Ports''' || 
:*Connect up to eight SATA drives simultaneously, with a maximum total storage capacity of 176TB (22TB per drive).
::<span class="tb_red">'''Note:''' Startup current reaches 16A with 8 3.5" HDDs. DC power is not applicable; please use ATX power supply only.</span>
:*Backward compatible with SATA 6G, 3G and 1.5G hard drives. It supports data transfer rates of 5.0, 3.0 and 1.5 Gbit/s.
|-
| '''Multiple Peripheral Ports''' || 
'''Compact form factor with rich ports and expandable peripherals.'''
:*'''Dual Ethernet Ports for High-Performance Networking'''
::Features one 1GbE Gigabit Ethernet port and one 2.5GbE port with a maximum speed of 2500Mbps.
:*'''Dual HDMI 2.0 Ports'''
::Supports dual 4K display output for multimedia playback and industrial applications.
:*'''Dual MIPI DSI/CSI-2 Connectors'''
::22-pin FPC connectors (0.5mm pitch), fully compatible with Raspberry Pi 5 CSI and DSI modules for seamless camera and display connection.
:*'''12-Pin GPIO Header'''
::Integrates general I/O ports, external power button and 12V PWM fan header, enabling DIY customization for enclosures and cooling systems.
:*'''MicroSD Card Slot'''
::Works with Compute Module 5 Lite variants (models without onboard eMMC storage).
:*'''USB Connectors'''
::USB-C: Dedicated for OS image loading on CM5 models with onboard eMMC.
::USB2.0 Type-A & USB3.0 Type-A: For connecting external devices such as USB flash drives, keyboards and mice.
:*'''PWM Fan Connector'''
::Used for active heat dissipation.
:*'''RTC Battery Connector'''
::Keeps the system clock accurate even when the device is powered off.
:*'''Power Button'''
::Controls power-on and power-off for both CM5 and connected SATA devices.
|-
|'''Built-in LED Indicators'''||
:*'''HDD/SSD Status LED'''
::Flashing: Data reading / writing
::Solid On: Drive connected normally
::Off: No drive detected
:*'''Power Indicator: Red LED'''
:*'''Activity Indicator: Green LED'''
|-
|'''Power Supply & Control'''||
:*'''Built-in High-efficiency DC/DC Step-down Converters'''
::Deliver stable 5V 12A output. One single power supply can power the CM5 module and all attached SATA drives simultaneously.
:*'''Automatic Drive Power Cut-off'''
::Automatically cuts power to SATA devices when CM5 shuts down. This function only works with DC power input; it is not supported via the 4-pin ATX connector.
|-
|'''Dual Power Input''' || 
'''Input Voltage: 12V DC ± 5%'''

'''<span style="color:red">Warning: Over-voltage will permanently damage your hard drives!</span>'''
:*'''Recommended power supply for DC jack:'''
::For 8 × 2.5" SATA HDD/SSD: 12V 10A power adapter
::For 4 × 3.5" SATA HDD: 12V 10A power adapter
:*'''Recommended power supply for 4-pin ATX connector: 12V 20A'''
:<span class="tb_red">*Warning: Only one power source shall be connected at a time.</span>
|-
| '''Notes''' || 
'''<span style="color:red">The X1509 does not support system boot from SATA drives under the current CM5 firmware version.</span>'''
|}

==Packing List==

==User Manual==
* Hardware Installation: 
* How to make it work:

==FAQ==
<!-- 这里提供了一个Q&A的模板，增加Q&A时按照下面的格式写就可以了 -->
<div class="toccolours mw-collapsible mw-collapsed">
<div style="font-weight:bold;line-height:1.0;">
Q1: Question 1
</div>
<div class="mw-collapsible-content">
A: Place the answer here.
</div>
</div>

<!--Add review function! -->
‎<comment-streams id="main"/>

<!-- 这里列出了我们当前所有的分类：检查当前的页面应该属于下面的哪个分类，从字面意思来判断，然后将其它的分类删除就可以了，如果下面的分类不够，也可以在这里写新的分类，但是新的分类不要随便加！！by huangyp on 2026.4.23-->
[[Category:Product Manual]]
[[Category:Raspberry pi]]


<!--Please choose the  -->
<!--Remove other categories, just keep the appropriate categories -->