View source for X760

{{Deprecated}}
{{GD Template Impl}}
[[File:X760-IMG-7024.jpg|thumb|right|X760 V1.2 POE expansion board]]
[[File:X760-IMG-7107-diagram.jpg|thumb|right|X760 V1.2 POE expansion board]]
[[File:X760-IMG-7018.jpg|thumb|right|X760 V1.2 POE expansion board]]
[[File:X760-IMG-7021.jpg|thumb|right|X760 V1.2 POE expansion board]]

==Overview==
Power over Ethernet (PoE) expansion board can make your project wiring a breeze - and best of all they work to connect any 802.3at/802.3af-capable router to your Raspberry Pi 3 model B+ and 4 model B.  You can now power your Raspberry Pi and other devices in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.

This is an economical, practical, high-performance, and reliable Isolated 5V 5000mA PoE+ expansion baord with a variety of power output connectors based on IEEE 802.3at standard. It can divide power from a network cable, and can be used with any PoE/POE+ injector that is compatible with IEEE 802.3at /802.3af, and supply power for Raspberry Pi and other non-PoE network equipment.

Simply attach the standoffs in the four fixed holes of the expansion board, then connect to the Raspberry Pi's pin header using the specially-made daughter board X760-A1. Once the board is connected, you can power your Pi through the RJ-45 network connector.

The X760 provides a 5V maximum 5A share power output, and it supports raspberry pi board with POE function such as raspberry pi 4 model b and raspberry pi 3 model b+;  and X760 complies with the 802.3at POE standard and backward compatible with 802.3af also.

==Features==
* IEEE802.3at Standard (backward compatible with 802.3af)
* Power Output: 5Vdc Max 5A
* Fully isolated switched-mode power supply
* Uses Texas Instruments' high-power, high-efficiency PoE interface PD and PWM controller
* Integrated Short Circuit Protection and Output Over Voltage Protection
* Supplies total share 5 Amps regulated DC power and output via XH2.54 connectors, screw terminal and USB-A sockets
* No soldering and cabling required
* Mounting holes and standoffs provide mechanical stability of the RPi and X760 assembly

==Specification==
* Power input: 38~57Vdc
* Output voltage: 5Vdc +/-5%
* Output current: 4.8~5.5A (IEEE 802.3at), 2.5A (IEEE 802.3af)
* Efficiency: ≥ 80%
* Isolation: 1500V

<span style="color:red;">WARNING:</span>

DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB  or Type-C SOCKET.

==Packing List==
* 1 x X760 board
* 1 x X760-A1 board
* 1 x Spacer M/F M2.5*11+6mm
* 4 x Spacer M/F M2.5*5+6mm
* 4 x Spacer F/F M2.5*17mm
* 4 x Screw M2.5*6mm

==Document==

<!--增加评论功能！ -->
<comment-streams />

<!--请选择合适的分类，多余的分类请删除； -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]